3.3V HCMOS SMD OSCILLATOR WITH STANDBY
MODEL: F4100 SERIES
FEATURES
• 3.3V Operation
• HCMOS Output
• Standby Function
OPTIONS
• 1.05mm Height Max
• Tape and Reel (2,000 pcs. STD)
• PART NUMBER SELECTIONLearn More - Internet Required
Frequency
Operating
Frequency
Model
Number
Part Number
Stability1 Temperature (ºC) Range (MHz)
±100PPM
±100PPM
±50PPM
±50PPM
±25PPM
±25PPM*
±20PPM*
-10 ~ +70
-40 ~ +85
-10 ~ +70
-40 ~ +85
-10 ~ +70
-40 ~ +85
-10 ~ +70
0.012 ~ 170.000
0.012 ~ 170.000
0.012 ~ 170.000
0.012 ~ 170.000
0.012 ~ 165.000
0.012 ~ 156.520
0.012 ~ 162.000
116-Frequency-xxxxx F4100
117-Frequency-xxxxx F4100R
124-Frequency-xxxxx F4105
125-Frequency-xxxxx F4105R
126-Frequency-xxxxx F4106
127-Frequency-xxxxx F4106R
128-Frequency-xxxxx F4108
Learn more about:
Part Marking Identification
Tape and Reel Specification
Mechanical Specification
Internet required
• ELECTRICAL CHARACTERISTICS
PARAMETERS
Frequency Range (FO)
Storage Temperature Range (TSTG)
MAX (unless otherwise noted)
0.012 ~ 170.000 MHz
-55ºC ~ +125ºC
Supply Voltage
Input Current
(VDD)
(IDD)
3.3V ± 10%
0.012 ~ 0.040 MHz
0.040+ ~ 1.500 MHz
3mA
6mA
1.500+ ~ 32.000 MHz
15mA
20mA
25mA
40mA
32.000+ ~ 50.000 MHz
50.000+ ~ 67.000 MHz
67.000+ ~ 170.000 MHz
Output Symmetry (50% VDD)
0.012 ~ 50.000 MHz
50.000+ ~ 170.000 MHz
Rise Time (10% ~ 90% VDD) (TR)
0.012 ~ 80.000 MHz
80.000+ ~ 125.000 MHz
125.000+ ~ 170.000 MHz
Fall Time (90% ~ 10% VDD) (TF)
0.012 ~ 80.000 MHz
80.000+ ~ 125.000 MHz
125.000+ ~ 170.000 MHz
45% ~ 55%
40% ~ 60%
6nS
4nS
3nS
6nS
4nS
3nS
Output Voltage
(VOL)
(VOH)
(IOL)
(IOH)
(HCMOS)
10% VDD
90% VDD Min
2mA Min
-2mA Min
15pF
Output Current
Output Load
Standby Current
Start-up Time
10µA
(TS)
0.012 ~ 32.000 MHz
32.000+ ~ 170.000 MHz
Output Disable Time 2
Output Enable Time 2
0.012 ~ 32.000 MHz
32.000+ ~ 170.000 MHz
Jitter
5mS
10mS
150nS
5mS
10mS
12kHz ~ 20MHz
RMS Period
Cycle-to-Cycle
0.3pS Typ.
2.5pS Typ.
20pS Typ.
All dimensions are in millimeters.
• ENABLE / DISABLE FUNCTION 2
1 Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load change, aging,
shock, and vibration. *Excludes Shock/Vibration
INH (Pin 1)
OUTPUT (Pin 3)
ACTIVE
OPEN 2
2 An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open.
Note: A 0.01µF bypass capacitor should be placed between VDD (Pin 4) and GND (Pin 2) to
minimize power supply line noise.
'1' Level VIH ≥ 70% VDD
'0' Level VIL ≤ 30% VDD
ACTIVE
High Z
All specifications subject to change without notice. Rev. 6/1/04
FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1(239)693-0099 FAX +1(239)693-1554 http://www.foxonline.com
55
© 2004 FOX ELECTRONICS