MIPI/DSI Receiver
with HDMI Transmitter
ADV7533
FEATURES
APPLICATIONS
General
Mobile systems
Low power MIPI/DSI receiver
Low power HDMI/DVI transmitter ideal for portable
applications
CEC controller and expanded message buffer (3 messages)
reduces system overhead
Cellular handsets
Digital video cameras
Digital still cameras
Personal media players
Gaming
Incorporates HDMI v.1.3 (x.v.Color™) technology
Compatible with DVI v.1.0
Optional embedded HDCP keys to support HDCP 1.3
1.8 V, 1.2 V (optional), and 3.3 V supplies for ultralow
operating power
Audio inputs accept logic levels from 1.8 V to 3.3 V
MIPI/DSI receiver
2-, 3-, or 4-lane DSI receiver
GENERAL DESCRIPTION
The ADV7533 is a multifunction video interface chip. The
ADV7533 provides a mobile industry processor interface/
display serial interface (MIPI®/DSI) input port, a high definition
multimedia interface (HDMI®) data output in a 49-ball wafer
level chip scale package (WLCSP). The display serial interface
(DSI) input provides up to four lanes of MIPI/DSI data, each
running up to 800 Mbps. The DSI Rx implements DSI video
mode operation only. The HDMI Tx supports video resolutions
using pixel clocks of up to 80 MHz.
Supports up to 800 Mbps per lane
Compatible with DPHY V.0.90 and DSI V.1.02
Supports inputs of
16-bit RGB 4:4:4
24-bit RGB 4:4:4
30-bit RGB 4:4:4
With the optional inclusion of embedded HDCP keys, the
ADV7533 allows the secure transmission of protected content,
as specified by the HDCP 1.3 protocol.
HDMI (TMDS) video out
The ADV7533 supports x.v.Color™ (gamut metadata) for a
wider color gamut.
The ADV7533 supports both S/PDIF and 2-channel I2S audio.
Its high fidelity 2-channel I2S can transmit stereo up to a 192 kHz
sampling rate. The S/PDIF can carry stereo LPCM audio or
compressed audio, including Dolby® Digital and DTS®.
80 MHz operation supports all video and graphics
resolutions from 480i to 1080p at 30 Hz
Programmable 2-way color space converter
Output supports
36-, 30-, or 24-bit RGB 4:4:4
36-, 30-, or 24-bit YCbCr 4:4:4
Automatic input video format timing detection (CEA-861E)
Digital audio
Supports standard S/PDIF for stereo LPCM or compressed
audio up to 192 kHz
The ADV7533 helps to reduce system design complexity and
cost by incorporating such features as an I2C master for EDID
reading and 5 V tolerance on the I2C and Hot Plug™ detect pins.
Fabricated in an advanced CMOS process, the ADV7533 is
available in a space saving, 49-ball, WLCSP surface mount
package. This package is RoHS compliant and specified to
operate from −10°C to +85°C.
2-channel uncompressed LPCM I2S audio up to 192 kHz
Special features for easy system design
On-chip MPU with I2C master to perform EDID reading and
HDCP operations; reports HDMI events through interrupts
and registers
5 V tolerant I2C and HPD I/Os, no extra device needed
No audio master clock needed for supporting S/PDIF
and I2S
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2011 Analog Devices, Inc. All rights reserved.