ESD1L001, SZESD1L001
ESD Protection Diodes
Low Capacitance ESD Protection Diodes
for High Speed Data Line
The ESD1L001 transient voltage suppressor is designed to protect
four high speed data lines from ESD. Ultra−low capacitance and low
ESD clamping voltage make this device an ideal solution for
protecting voltage sensitive high speed data lines. The small form
factor, flow−through style package allows for easy PCB layout and
matched trace lengths necessary to maintain consistent impedance
between high speed differential lines such as USB 3.0 and HDMI.
www.onsemi.com
MARKING
DIAGRAM
6
SC−88
W1 SUFFIX
CASE 419B
XXXMG
Features
G
1
• Low Capacitance (0.3 pF Typical, I/O to GND)
• Short to Battery Survivability
• Protection for the Following IEC Standards:
IEC 61000−4−2 Level 4 (ESD)
1
XXX
M
G
= Specific Device Code
= Date Code
= Pb−Free Package
• Low ESD Clamping Voltage (30 V Typical, +16 A TLP, I/O to GND)
(Note: Microdot may be in either location)
• SZ Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AEC−Q101 Qualified and
PPAP Capable
PIN CONFIGURATION
AND SCHEMATIC
• These Devices are Pb−Free and are RoHS Compliant
Pin 1
Pin 2 Pin 4
Pin 5
Typical Applications
• USB2.0/3.0
• LVDS
• HDMI
• High Speed Differential Pairs
Pin 6
Pin 3
MAXIMUM RATINGS (T = 25°C unless otherwise noted)
J
Rating
Symbol
Value
−55 to +125
−55 to +150
260
Unit
°C
=
Operating Junction Temperature Range
Storage Temperature Range
T
J
T
stg
°C
Lead Solder Temperature −
Maximum (10 Seconds)
T
L
°C
ORDERING INFORMATION
IEC 61000−4−2 Contact
IEC 61000−4−2 Air
ESD
8
15
kV
kV
Device
Package
Shipping
ESD1L001W1T2G
SC−88
(Pb−Free)
3000 /
Tape & Reel
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
SZESD1L001W1T2G
SC−88
3000 /
(Pb−Free)
Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2016
1
Publication Order Number:
May, 2017 − Rev. 0
ESD1L001/D