EOM-104 Series
4-port embedded managed Ethernet switch modules
Features and Benefits
• 10/100BaseT(X) and 100BaseFX Ethernet interfaces
• Turbo Ring and RSTP/STP for network redundancy
• SNMP and email alerts for event trapping and notifications
• Two-thirds the size of a business card
• Low power consumption
• -40 to 75°C operating temperature range
Certifications
Introduction
The EOM-104 Series is designed for device manufacturers who would like to embed Ethernet modules in their products to enhance performance
and reliability. The EOM-104 Series provides an easy and cost-effective integrated solution for adding an Ethernet switch module to an existing
product.
The modules support 10/100M Ethernet transmission and come with Turbo Ring’s fast recovery time of under 20 ms. The EOM-104 Series provides
a rich set of peripherals, such as Turbo Ring Enable and GPIO programming pins, and is an ideal solution for embedded Ethernet applications.
Specifications
Ethernet Interface
Standards
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3x for flow control
IEEE 802.1p for Class of Service
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
Ethernet Software Features
Protocols
BOOTP, DHCP Client, HTTP, RARP, RMON, SMTP, SNMPv1/v2c/v3, Syslog, Telnet,
TFTP
MIB
Bridge MIB, Ethernet-like MIB, MIB-II, P-BRIDGE MIB, RMON MIB Groups 1, 2, 3, 9,
RSTP MIB
Switch Properties
MAC Table Size
1 K
Packet Buffer Size
512 kbits
1
www.moxa.com