QUARTZ
EURO
EM53S Series TCXO
Clipped Sinewave 5 x 3.2 x1.2mm SMD
Micro-miniature SMD package 5 x 3.2mm
Stability from ±1ppm over -30° to +75°C
Supply Voltage from 2.3 Volts to 5.5 Volts
Produced as TCXO or VCTCXO with EFC
Readily customized
EM53S - OUTLINES AND DIMENSIONS
DESCRIPTION
EM53 series TCXOs are ceramic SMD TCXOs packaged in an industry-
standard, micro-miniature 5 x 3.2mm package. This TCXO can be run
from a supply voltage of 2.3 to 5.5 Volts. Close tolerances from
±1ppm over -30° to +75°C are available. The part can be produced
as either a standard TCXO or a voltage-controlled TCXO (VCTCXO).
SPECIFICATION
Product Series Code
TCXO:
EM53S
VCTCXO:
VEM53S
Frequency Range:
Output Waveform:
Initial Calibration Tolerance*:
Standard Frequencies:
10.0MHz to 27.0MHz
Clipped Sinewave
<±1ppm at 25°C
10.0, 12.80, 13.0, 14.40,
15.36, 16.384, 19.2, 19.440,
and 19.68MHz (Partial list)
See table
Operating Temperature Range:
Frequency Stability
vs. Ageing:
±1.0 ppm max. first year
±0.3 ppm max. ±5% change
±0.3 ppm max. ±10% change
±1ppm max. for one reflow
(Measured after 24 hours)
+2.8, +3.0 or +5.0Volts
(Specify when ordering)
0.8V p-p minimum
2ms typical, 5ms max.
See table below
10kOhm//10pF ±10%
-10dB typical, -7dB max.
See table
vs. Voltage Change:
vs. Load Change:
vs. Reflow:
Supply Voltage:
Output Voltage Level:
Start-up Time:
Current Consumption:
Output Load:
Harmonic Distortion:
SSB Phase Noise:
Output Format:
VEM53S VOLTAGE CONTROL SPECIFICATION
Control Voltage: Standard = +1.5±1.0Volts for all input
voltages. (Contact technical sales if
+2.5±2.0 Volts is required.)
Frequency Deviation: ±6.0 ppm min.
Slope Polarity:
Positive (increase of control voltage increases
DC block, AC coupled
-50° to +100°C
output frequency.)
Storage Temperature:
Input Impedance:
1.0M min.
Modulation Bandwidth: 3.0kHz min. measured at -3dB
Linearity:
10% max.
10
* Stability over temperature is measured from this initial frequency.
PHASE NOISE
Offset
(Hz)
100
1k
10k
100k
-150
FREQUENCY STABILITY
SSB Phase Noise
at 25°C
EM53S
13MHz
(dBc/Hz)
-80 -115
-135
-148
Frequency Stability (ppm)
0 ~ +50
±0.5
±1.0
±1.5
±2.0
P
±2.5
P
ASK
P
P
x
P
P
P
x
-10 ~ +60
x
x
x
x
P
P
PART NUMBERING PROCEDURE
Temperature
-20 ~ +70
Range (°C)
P
P
Example:
EM53S3-19.44-2.5/-30+75
-30 ~ +75
-40 ~ +85
x
P
PP
P
Series Description
TCXO = EM53S
VCTCXO = VEM53S
x
x
x
P= available, x = not available, ASK = call Technical Sales
Supply Voltage
28 = 2.8 VDC
3 = 3.0 VDC
5 = 5.0 VDC
CURRENT CONSUMPTION
Supply Voltage
Max Current
1.5mA
Frequency (MHz)
Stability over OTR (±ppm)
Operating Temperature Range (OTR) (°C)
Lower and upper limits.
10.0 to 15MHz
15.01 to 26MHz
26.01 to 27MHz
Frequency
Range
2.0mA
2.5mA
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 info@euroquartz.co.uk www.euroquartz.co.uk