MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Low impedance, 105℃
LXZ P5-43
Lower Z
LXYSeries
Downsized
Adoption of innovative electrolyte and new technologies
Endurance with ripple current : 2,000 to 8,000 hours at 105
Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
・
・
・
・
・
LXY
℃
Lower Z
LXV P5-48
RoHS2 Compliant
AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information.
SPECIFICATIONS
◆
Items
Characteristics
Category
-55 to +105
10 to 63Vdc
℃
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
20% (M)
(at 20 , 120Hz)
℃
±
I=0.01CV or 3µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20 after 2 minutes)
℃
Dissipation Factor
Rated voltage (Vdc
tan (Max.)
)
10V 16V 25V 35V 50V 63V
0.19 0.16 0.14 0.12 0.10 0.10
(tan
)
δ
δ
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase.
10 to 50Vdc : 3max.
(at 20 , 120Hz)
℃
Low Temperature
Characteristics
(Max. Impedance Ratio)
Z(-55 )/Z(+20
)
℃
℃
63Vdc : 6max.
(at 120Hz)
Endurance
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated
℃
ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105
.
℃
Time
5 & 6.3 : 2,000hours 8 : 3,000hours 10 : 5,000hours 12.5 : 7,000hours 16 & 18 : 8,000hours
φ
φ
φ
φ
φ
Capacitance change
20% of the initial value
≦±
D.F. (tan
Leakage current
)
200% of the initial specified value
The initial specified value
δ
≦
≦
The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without
℃
℃
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change 20% of the initial value
D.F. (tan
≦±
)
200% of the initial specified value
The initial specified value
δ
≦
≦
Leakage current
DIMENSIONS [mm]
◆
●
Terminal Code : E
Sleeve (PET : Dark blue)
φD
5
6.3
8
10 12.5 16
φd 0.5 0.5 0.6 0.6 0.6 0.8
F
φD'
L'
2.0 2.5 3.5 5.0 5.0 7.5
φD+0.5max.
L'
15min.
4min.
L+1.5max.
(φ5 toφ10)
(φ12.5 toφ16)
Gas escape end seal
Vent
(Exceptφ5 &φ6.3)
PART NUMBERING SYSTEM
◆
1
2
3
4
5
6
7
8
9
10
11 12 13
14
15 16 17
18
E L X Y A A A E A A A A A M A A A N
Supplement code
Size code
Capacitance tolerance code
µ
µ
Capacitance code (ex. 120 F:121, 2,200 F:222)
·
Lead forming taping code
Terminal code
Voltage code (ex. 10V:100, 25V:250, 63V:630)
Series code
Category
Please refer to "Product code guide (radial lead type)"
RATED RIPPLE CURRENT MULTIPLIERS
Frequency Multipliers
◆
・
Frequency(Hz)
The endurance of capacitors is reduced with internal heating produced by ripple
120
1k
10k
0.90
0.94
0.95
0.95
0.98
100k
1.00
1.00
1.00
1.00
1.00
Capacitance(µF)
current at the rate of halving the lifetime with every 5 rise.
℃
10 to 180
0.40
0.50
0.60
0.75
0.85
0.75
0.85
0.87
0.90
0.95
When long life performance is required in actual use, the rms ripple current has to
be reduced.
220 to 560
680 to 1,800
2,200 to 3,900
4,700 to 8,200
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
CAT. No. E1001R
5-46