LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Long life snap-ins, 105℃
LXM P243
LXSSeries
Longer life
For solar power generation
・
・
・
・
・
・
LXS
Endurance with ripple current : 5,000 hours at 105
Rated voltage range : 160 to 500V
Downsized from LXQ series
Non solvent resistant type
℃
Downsized
Higher ripple
LXQ P249
RoHS Compliant
SPECIFICATIONS
◆
Items
Characteristics
Category
Temperature Range
-
25 to +105℃
Rated Voltage Range 160 to 500Vdc
Capacitance Tolerance ±20% (M)
(at 20℃, 120Hz)
(at 20℃ after 5 minutes)
(at 20℃, 120Hz)
Leakage Current
I≦3 CV
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
160 to 400V 420 to 500V
0.15 0.20
160 to 400V 420 to 500V
Dissipation Factor
(tanδ)
Rated voltage (Vdc)
tanδ(Max.)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Rated voltage (Vdc)
4
8
Z(-25℃)/Z(+20℃)
(at 120Hz)
Endurance
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105℃.
Capacitance change
D.F. (tanδ)
Leakage current
≦±20% of the initial value
≦200% of the initial specified value (500Vdc : ≦250%)
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
D.F. (tanδ)
Leakage current
≦±15% of the initial value
≦150% of the initial specified value
≦The initial specified value
DIMENSIONS [mm]
◆
●
Terminal Code : LI (φ30,φ35)
●
Terminal Code : VS (φ22 toφ35) : Standard
Sleeve (PET : Brown)
PC board pin-out
-1.2×6
Negative mark
PC board pin-out
Sleeve (PET : Brown)
Negative mark
2
5±0.5
2-φ2
14.2±1
L±2.5
4.5±1
4.0±0.5
L±2.5
Vent
Vent
The standard design has no plastic disc.
PART NUMBERING SYSTEM
◆
1
2
3
4
5
6
7
8
9
10
11 12 13
14
15 16 17
18
E L X S
V S N
M
S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 330µF:331, 2,200µF:222)
Dummy terminal code
Terminal code
Voltage code (ex. 160V:161, 315V:3B1, 450V:451)
Series code
Category
Please refer to "Product code guide (snap-in type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
CAT. No. E1001N
246