EL7156
®
Data Sheet
November 3, 2005
FN7280.2
High Performance Pin Driver
Features
• Clocking speeds up to 40MHz
The EL7156 high performance pin driver with 3-state is
suited to many ATE and level-shifting applications. The 3.5A
peak drive capability makes this part an excellent choice
when driving high capacitance loads.
• 15ns tr/tf at 2000pF C
LOAD
• 0.5ns rise and fall times mismatch
• 0.5ns T -T prop delay mismatch
The output pin OUT is connected to input pins V or V
ON OFF
H
L
respectively, depending on the status of the IN pin. When the
OE pin is active low, the output is placed in the 3-state mode.
The isolation of the output FETs from the power supplies
enables V and V to be set independently, enabling level-
• 3.5pF typical input capacitance
• 3.5A peak drive
• Low on resistance of 3.5Ω
• High capacitive drive capability
• Operates from 4.5V to 16.5V
H
L
shifting to be implemented. Related to the EL7155, the
EL7156 adds a lower supply pin V - and makes V an
S
L
isolated and independent input. This feature adds
applications flexibility and improves switching response due
to the increased enhancement of the output FETs.
• Pb-free plus anneal available (RoHS compliant)
Applications
• ATE/burn-in testers
• Level shifting
• IGBT drivers
This pin driver has improved performance over existing pin
drivers. It is specifically designed to operate at voltages
down to 0V across the switch elements while maintaining
good speed and on-resistance characteristics.
Available in the 8 Ld SO and 8 Ld PDIP packages, the
EL7156 is specified for operation over the full -40°C to
+85°C temperature range.
• CCD drivers
Ordering Information
Pinout
PART
TAPE &
PKG.
EL7156
(8 LD PDIP, SO)
TOP VIEW
PART NUMBER MARKING
REEL
PACKAGE
DWG. #
EL7156CN
EL7156CN
-
-
8 Ld PDIP
MDP0031
MDP0031
EL7156CNZ
(Note)
EL7156CNZ
8 Ld PDIP*
(Pb-free)
VS+
OE
1
2
3
4
8
7
6
5
VH
L
O
G
I
EL7156CS
7156CS
7156CS
-
7”
13”
-
8 Ld SO
8 Ld SO
8 Ld SO
MDP0027
MDP0027
MDP0027
MDP0027
OUT
VL
EL7156CS-T7
IN
C
EL7156CS-T13 7156CS
EL7156CSZ
(Note)
7156CSZ
8 Ld SO
(Pb-free)
GND
VS-
EL7156CSZ-T7 7156CSZ
(Note)
7”
8 Ld SO
(Pb-free)
MDP0027
MDP0027
EL7156CSZ-T13 7156CSZ
(Note)
13”
8 Ld SO
(Pb-free)
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
*Pb-free PDIPs can be used for through hole wave solder processing
only. They are not intended for use in Reflow solder processing
applications.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003, 2005. All Rights Reserved.
1
All other trademarks mentioned are the property of their respective owners.