EL7104
®
Data Sheet
May 6, 2005
FN7113.1
High Speed, Single Channel, Power
MOSFET Driver
Features
• Industry-standard driver replacement
• Improved response times
• Matched rise and fall times
• Reduced clock skew
The EL7104 is a matched driver IC that improves the
operation of the industry-standard TC-4420/29 clock drivers.
The Elantec version is a very high speed driver capable of
delivering peak currents of 1A into highly capacitive loads.
The high speed performance is achieved by means of a
proprietary “Turbo-Driver” circuit that speeds up input stages
by tapping the wider voltage swing at the output. Improved
speed and drive capability are enhanced by matched rise
and fall delay times. These matched delays maintain the
integrity of input-to-output pulse-widths to reduce timing
errors and clock skew problems. This improved performance
is accompanied by a 10-fold reduction in supply currents
over bipolar drivers, yet without the delay time problems
commonly associated with CMOS drivers.
• Low output impedance
• Low input capacitance
• High noise immunity
• Improved clocking rate
• Low supply current
• Wide operating range
• Separate drain connections
• Pb-Free available (RoHS compliant)
The EL7104 is available in 8-pin SO and 8-pin PDIP
packages and is specified for operation over the full -40°C to
+85°C temperature range.
Applications
• Clock/line drivers
Ordering Information
• CCD drivers
PART
TAPE &
REEL
NUMBER
PACKAGE
8-Pin PDIP
8-Pin SO
8-Pin SO
8-Pin SO
PKG. DWG. #
MDP0031
MDP0027
MDP0027
MDP0027
MDP0027
• Ultrasound transducer drivers
• Power MOSFET drivers
• Switch mode power supplies
• Resonant charging
• Cascoded drivers
EL7104CN
-
-
EL7104CS
EL7104CS-T7
EL7104CS-T13
7”
13”
-
EL7104CSZ
(See Note)
8-Pin SO
(Pb-free)
Pinout
EL7104
(8-PIN SO, PDIP)
TOP VIEW
EL7104CSZ-T7
(See Note)
8-Pin SO
(Pb-free)
7”
MDP0027
MDP0027
EL7104CSZ-T13
(See Note)
8-Pin SO
(Pb-free)
13”
V+
IN
1
2
3
4
8
7
6
5
V+
NOTE: Intersil Pb-free products employ special Pb-free material sets;
molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with
both SnPb and Pb-free soldering operations. Intersil Pb-free products
are MSL classified at Pb-free peak reflow temperatures that meet or
exceed the Pb-free requirements of IPC/JEDEC J STD-020.
P_OUT
N_OUT
GND
NC
GND
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-352-6832 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2003, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.