EL6261C Product Brief
Quad 20MHz & Quad, 80MHz, Switched Gain Pre-Amp
Features
General Description
• Autozero of output offset to
<10mV
• 3 selectable gains; 8KΩ, 15KΩ,
40KΩ
• Space saving QSOP-24 package
The EL6261C consists of 4 20MHz trans-impedance amplifiers and 4
80MHz trans-impedance amplifiers. The four 80Mhz amplifier out-
puts also are averaged to provide differential 80MHz outputs.
The EL6261C is designed to amplify the photo diode currents for CD,
DVD, or other photo diode pick-up applications.
• Differential Sum & Sum-Bar
Two TTL/CMOS compatible inputs select the gain for all eight ampli-
fiers. The gain settings are 8KΩ, 15KΩ and 40KΩ for all channels.
The sum and sumbar outputs are 11KΩ, 20KΩ and 53KΩ single
ended. Gain matching is typically 3%, channel to channel. An auto-
zero input brought high after power up reduces the output offsets to
less than 10mV.
outputs
• Single 5V supply
Applications
• DVD RAM, R/W and ROM
• CD R/W, R and ROM
• MO drives
• Optical Pickup pre-amplifier
• Servo positioning systems
• High speed instrumentation
The E,F,G,H channel bandwidths are 20MHz for all gains and reason-
able input and output loads. The A,B,C,D,S,S channels have
bandwiths of 80MHz, 45MHz, and 25MHz at low, middle, and high
gains respectively.
Each amplifier output can sink or source up to 5mA, and their outputs
can swing 1Vp-p at full bandwidth.
Ordering Information
The EL6261C operates from a single +5V supply, and is available in
QSOP-24 package. It is specified for operation from -0°C to 70°C
Part No
Temp. Range
Package
Outline #
EL6261CU
0°C to +70°C
QSOP-24
MDP0040
Connection Diagram
1
2
24
23
22
21
20
19
18
17
16
15
14
13
Gain 0 Select
AZ Input
Sum Output
Gain 1 Select
Ref Input
A Input
3
Sum Output
A Output
B Output
C Output
D Output
4
5
B Input
C Input
D Input
6
7
8
0V (VSS
)
+5V (VDD
E Output
F Output
)
E Input
9
10
11
12
F Input
G Output
H Output
G Input
H Input
24-Pin QSOP
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 1998 Elantec, Inc.