EL5285C - Preliminary
Dual and Window 4ns High-Speed Comparators
Features
General Description
• 4ns typ. propagation delay
• 5V to 12V input supply
• +2.7V to +5V output supply
• True-to-ground input
The EL5285C comparator is designed for operation in single supply
and dual supply applications with 5V to 12V between VS+ and VS-.
For single supplies, the inputs can operate from 0.1V below ground for
use in ground sensing applications.
• Rail-to-rail outputs
• Separate analog and digital
supplies
The output side of the comparators can be supplied from a single sup-
ply of 2.7V to 5V. The rail-to-rail output swing enables direct
connection of the comparator to both CMOS and TTL logic circuits.
• Active low latch
• Single available (EL5185C)
• Quad available (EL5485C &
EL5486C)
• Pin-compatible 6ns family
available (EL5x81C, EL5283C &
EL5482C)
The latch input of the EL5285C can be used to hold the comparator
output value by applying a low logic level to the pin. The EL5285C
features two separate comparators
The EL5285C is available in the 14-pin SO package and is specified
for operation over the full -40°C to +85°C temperature range. Also
available are a single (EL5185C) and quad versions (EL5485C and
EL5486C.)
Applications
• Threshold detection
• High speed sampling circuits
• High speed triggers
• Line receivers
• PWM circuits
Pin Configurations
• High speed V/F converters
Ordering Information
Part No.
Package
Tape & Reel
Outline #
MDP0027
MDP0027
MDP0027
VS+
INA+
INA-
NC
1
2
3
4
5
6
7
14 VSD
EL5285CS
14-Pin SOIC
14-Pin SOIC
14-Pin SOIC
-
EL5285CS-T7
EL5285CS-T13
7”
+
-
13 OUTA
12 LATCHA
11 NC
13”
INB-
INB+
VS-
10 LATCHB
+
-
9
8
OUTB
GND
EL5285C
(14-Pin SO)
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.