60MHz Rail-to-Rail Input-Output Operational Amplifier
EL5211T
Features
• 60MHz (-3dB) Bandwidth
The EL5211T is a high voltage rail-to-rail input-output
amplifier with low power consumption. The EL5211T
contains two amplifiers. Each amplifier exhibits beyond
the rail input capability, rail-to-rail output capability and
is unity gain stable.
• 4.5V to 19V Maximum Supply Voltage Range
• 100V/μs Slew Rate
• 3mA Supply Current (per Amplifier)
• ±65mA Continuous Output Current
• ±300mA Output Short Circuit Current
• Unity-gain Stable
The maximum operating voltage range is from 4.5V to
19V. It can be configured for single or dual supply
operation, and typically consumes only 3mA per
amplifier. The EL5211T has an output short circuit
capability of ±300mA and a continuous output current
capability of ±65mA.
• Beyond the Rails Input Capability
• Rail-to-rail Output Swing
• Built-in Thermal Protection
The EL5211T features a high slew rate of 100V/μs, and
fast settling time. Also, the device provides common
mode input capability beyond the supply rails, rail-to-rail
output capability, and a bandwidth of 60MHz (-3dB). This
enables the amplifiers to offer maximum dynamic range
at any supply voltage. These features make the EL5211T
an ideal amplifier solution for use in TFT-LCD panels as a
• -40°C to +85°C Ambient Temperature Range
• Pb-Free (RoHS Compliant)
Applications*(see page 13)
• TFT-LCD Panels
• V
Amplifiers
COM
V
driver or static gamma buffer, and in high speed
COM
• Static Gamma Buffers
• Drivers for A/D Converters
• Data Acquisition
filtering and signal conditioning applications. Other
applications include battery power and portable devices,
especially where low power consumption is important.
The EL5211T is available in a thermally enhanced 8 Ld
HMSOP package, and a thermally enhanced 8 Ld DFN
package. Both feature a standard operational amplifier
pinout. The device operates over an ambient
temperature range of -40°C to +85°C.
• Video Processing
• Audio Processing
• Active Filters
• Test Equipment
• Battery-powered Applications
• Portable Equipment
10
V
A
C
= ±5V
S
V
8
6
= 1
= 1.5pF
|| 1kΩ (PROBE)
L
R
L
4
1kΩ
2
0
-2
-4
-6
-8
-10
560Ω
150Ω
100k
1M
10M
100M
FREQUENCY (Hz)
FIGURE 1. TYPICAL TFT-LCD V
APPLICATION
FIGURE 2. FREQUENCY RESPONSE FOR VARIOUS R
L
COM
May 12, 2010
FN6893.0
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2010. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.