EL5170, EL5370
®
Data Sheet
October 29, 2004
FN7309.5
100MHz Differential Twisted-Pair Drivers
Features
The EL5170 and EL5370 are single and triple high
bandwidth amplifiers with a fixed gain of 2. They are
primarily targeted for applications such as driving twisted-
pair lines in component video applications. The inputs signal
can be in either single-ended or differential form but the
outputs are always in differential form.
• Fully differential inputs and outputs
• Differential input range ±2.3V typ.
• 100MHz 3dB bandwidth at fixed gain of 2
• 1200V/µs slew rate
• Single 5V or dual ±5V supplies
• 50mA maximum output current
• Low power - 7.4mA per channel
• Pb-Free Available (RoHS Compliant)
The output common mode level for each channel is set by
the associated V
over 70MHz. Generally, these pins are grounded but can be
tied to any voltage reference.
pin, which have a -3dB bandwidth of
REF
All outputs are short circuit protected to withstand temporary
overload condition.
Applications
• Twisted-pair drivers
The EL5170 and EL5370 are specified for operation over the
full -40°C to +85°C temperature range.
• Differential line drivers
• VGA over twisted-pairs
Ordering Information
• ADSL/HDSL drivers
PART
NUMBER
PACKAGE
8-Pin SO
8-Pin SO
8-Pin SO
TAPE & REEL PKG. DWG. #
• Single ended to differential amplification
• Transmission of analog signals in a noisy environment
EL5170IS
-
7”
13”
-
MDP0027
MDP0027
MDP0027
MDP0027
EL5170IS-T7
EL5170IS-T13
Pinouts
EL5170
(8-PIN SO, MSOP)
TOP VIEW
EL5370
(24-PIN QSOP)
TOP VIEW
EL5170ISZ
(See Note)
8-Pin SO
(Pb-free)
EL5170ISZ-T7
(See Note)
8-Pin SO
(Pb-free)
7”
MDP0027
MDP0027
EN 1
24 OUT1
IN+
EN
1
8
7
6
5
OUT+
VS-
+
-
+
-
INP1 2
INN1 3
REF1 4
NC 5
23 OUT1B
22 NC
2
3
4
EL5170ISZ-
T13 (See Note)
8-Pin SO
(Pb-free)
13”
IN-
VS+
21 VSP
20 VSN
19 NC
EL5170IY
8-Pin MSOP
8-Pin MSOP
8-Pin MSOP
-
7”
13”
-
MDP0043
MDP0043
MDP0043
MDP0043
REF
OUT-
EL5170IY-T7
EL5170IY-T13
INP2 6
INN2 7
REF2 8
NC 9
EL5170IYZ
(See Note)
8-Pin MSOP
(Pb-free)
18 OUT2
17 OUT2B
16 NC
+
-
EL5170IYZ-T7
(See Note)
8-Pin MSOP
(Pb-free)
7”
MDP0043
MDP0043
INP3 10
INN3 11
REF3 12
15 OUT3
14 OUT3B
13 NC
EL5170IYZ-
T13 (See Note)
8-Pin MSOP
(Pb-free)
13”
+
-
EL5370IU
24-Pin QSOP
24-Pin QSOP
-
MDP0040
MDP0040
MDP0040
EL5370IU-T7
7”
EL5370IU-T13 24-Pin QSOP
13”
NOTE: Intersil Pb-free products employ special Pb-free material sets;
molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with
both SnPb and Pb-free soldering operations. Intersil Pb-free products
are MSL classified at Pb-free peak reflow temperatures that meet or
exceed the Pb-free requirements of IPC/JEDEC J STD-020C.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002-2004. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.