EL2227C
Dual Very Low Noise Amplifier
Features
General Description
• Voltage noise of only 1.9nV/ÖHz
• Current noise of only 1.2pA/ÖHz
• Bandwidth (-3dB) of 115MHz
@AV = +2
The EL2227C is a dual, low-noise amplifier, ideally suited to line
receiving applications in ADSL and HDSLII designs. With low noise
specification of just 1.9nV/ÖHz and 1.2pA/ÖHz, the EL2227C is per-
fect for the detection of very low amplitude signals.
• Gain-of-2 stable
The EL2227C features a -3dB bandwidth of 115MHz and is gain-of-2
stable. The EL2227C also affords minimal power dissipation with a
supply current of just 4.8mA per amplifier. The amplifier can be pow-
ered from supplies ranging from ±2.5V to ±12V.
• Just 4.8mA per amplifier
• 8-pin MSOP package
• ±2.5V to ±12V operation
The EL2227C is available in a space-saving 8-pin MSOP package as
well as the industry-standard 8-pin SO. It can operate over the -40°C
to +85°C temperature range.
Applications
• ADSL receivers
• HDSLII receivers
• Ultrasound input amplifiers
• Wideband instrumentation
• Communications equipment
• AGC & PLL active filters
• Wideband sensors
Ordering Information
Part No.
Package
8-Pin MSOP
8-Pin MSOP
8-Pin MSOP
8-Pin SO
Tape & Reel
Outline #
MDP0043
MDP0043
MDP0043
MDP0027
MDP0027
MDP0027
EL2227CY
-
Connection Diagram
EL2227CY-T13
EL2227CY-T7
EL2227CS
13”
7”
-
EL2227CS-T13
EL2227CS-T7
8-Pin SO
13”
7”
8-Pin SO
VOUTA
VINA-
VINA+
VS-
1
2
3
4
8
7
6
5
VS+
-
VOUTB
VINB-
VINB+
+
-
+
EL2227C
(8-Pin SO and 8-Pin MSOP)
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.