EL2070
®
Data Sheet
September 26, 2001
FN7031
200MHz Current Feedback Amplifier
Features
The EL2070 is a wide bandwidth, fast
settling monolithic amplifier
incorporating a disable/enable feature.
• 200MHz -3dB bandwidth, A = 2
V
• Disable/enable
• 12ns settling to 0.05%
Built using an advanced complementary bipolar process, this
amplifier uses current-mode feedback to achieve more
bandwidth at a given gain than conventional operational
amplifiers. Designed for closed-loop gains of ±1 to ±8, the
• V = ±5V @ 15mA
S
• Low distortion: HD2, HD3 @-60dBc at 20MHz
• Differential gain 0.02% at NTSC, PAL
• Differential phase 0.01° at NTSC, PAL
• Overload/short-circuit protected
• ±1 to ±8 closed-loop gain range
• Low cost
EL2070 has a 200MHz -3dB bandwidth (A = +2), and 12ns
V
settling to 0.05% while consuming only 15mA of supply
current. Furthermore, the fast disable/enable times of
200ns/100ns allow rapid analog multiplexing.
The EL2070 is an obvious high-performance solution for
video distribution and line-driving applications, especially
when its disable feature can be used for fast analog
multiplexing. Furthermore, the low 15mA supply current, and
the very low 5mA of supply current when disabled suggest
use in systems where power is critical. With differential
gain/phase of 0.02%/0.01°, guaranteed video specifications,
and a minimum 50mA output drive, performance in these
areas is assured.
Applications
• Video gain block
• Video distribution
• HDTV amplifier
• Analog multiplexing (using disable)
• Power-down mode (using disable)
• High-speed A/D conversion
• D/A I-V conversion
The EL2070’s settling to 0.05% in 12ns, low distortion, and
ability to drive capacitive loads make it an ideal flash A/D
driver. The wide 200MHz bandwidth and extremely linear
phase allow unmatched signal fidelity. D/A systems can also
benefit from the EL2070, especially if linearity and drive
levels are important.
• Photodiode, CCD preamps
• IF processors
Pinout
• High-speed communications
EL2070
(8-PIN SO, PDIP)
TOP VIEW
Ordering Information
PART
TEMP.
NUMBER
RANGE
PACKAGE
8-Pin PDIP
8-Pin SO
PKG. NO.
MDP0031
MDP0027
EL2070CN
EL2070CS
-40°C to +85°C
-40°C to +85°C
Manufactured under U.S. Patent No. 4,893,091
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.