EL1883
®
Data Sheet
April 24, 2006
FN7010.2
Sync Separator with Horizontal Output
Features
The EL1883 video sync separator is manufactured using
Elantec’s high performance analog CMOS process. This
device extracts sync timing information from both standard
and non-standard video input and also in the presence of
Macrovision pulses. It provides composite sync, vertical
sync, burst/back porch timing, and horizontal outputs. Fixed
70mV sync tip slicing provides sync edge detection when the
• NTSC, PAL, SECAM, non-standard video sync separation
• Fixed 70mV slicing of video input levels from 0.5V to
2V
P-P
P-P
• Low supply current - 1.5mA typ.
• Single 3V to 5V supply
• Composite sync output
video input level is between 0.5V
and 2V (sync tip
P-P
P-P
amplitude 143mV to 572mV). A single external resistor sets
all internal timing to adjust for various video standards. The
composite sync output follows video in sync pulses and a
vertical sync pulse is output on the rising edge of the first
vertical serration following the vertical pre-equalizing string.
For non-standard vertical inputs, a default vertical pulse is
output when the vertical signal stays low for longer than the
vertical sync default delay time. The horizontal output gives
horizontal timing with pre/post equalizing pulses.
• Vertical output
• Horizontal output
• Burst/back porch output
• Macrovision compatible
• Available in 8-pin SO package
• Pb-Free plus anneal available (RoHS compliant)
Applications
The EL1883 is available in an 8-pin SO package and is
specified for operation over the full -40°C to +85°C
temperature range.
• Video amplifiers
• PCMCIA applications
• A/D drivers
Ordering Information
• Line drivers
PART
PART
TAPE &
PKG.
NUMBER
MARKING
REEL
PACKAGE DWG. #
• Portable computers
• High speed communications
• RGB applications
• Broadcast equipment
• Active filtering
EL1883IS
EL1883IS-T7
1883IS
1883IS
-
7”
13”
-
8-Pin SO MDP0027
8-Pin SO MDP0027
8-Pin SO MDP0027
EL1883IS-T13 1883IS
EL1883ISZ
(See Note)
1883ISZ
8-Pin SO MDP0027
(Pb-free)
EL1883ISZ-T7 1883ISZ
(See Note)
7”
8-Pin SO MDP0027
(Pb-free)
Demo Board
• A dedicated demo board is available
EL1883ISZ-T13 1883ISZ
(See Note)
13”
8-Pin SO MDP0027
(Pb-free)
Pinout
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
EL1883
(8-PIN SO)
TOP VIEW
VDD
COMPOSITE SYNC OUT
COMPOSITE VIDEO IN
VERTICAL SYNC OUT
GND
1
2
3
4
8
7
6
5
HORIZONTAL OUTPUT
RSET
BURST/BACK
PORCH OUTPUT
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2003, 2004, 2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.