Aluminum Electrolytic Capacitors
Radial Lead Type
FP series A type
Features
Country of origin
● Endurance : 105 ℃ 4000 h to 5000 h
● High ripple current (2 to 2.5 times as high as FC series)
● Large capacitance (Up to 60 % larger than FC series)
● AEC-Q200 compliant
● Malaysia
● RoHS compliant
Specifications
Category temp. range
Rated voltage range
Capacitance range
Capacitance tolerance
Leakage current
–55 ℃ to +105 ℃
25 V to 35 V
510 μF to 2000 μF
±20 % (120 Hz / +20℃)
I ≦ 0.01 CV (μA) After 2 minutes
Rated voltage(V)
Dissipation factor(tan δ) 0.14 0.12
25
35
(120 Hz /+20℃)
Dissipation factor(tan δ)
For capacitance value ≧ 1000 μF, add 0.02 per every 1000 μF.
After following life test with DC voltage and +105 ℃±2 ℃ ripple current value applied
(The sum of DC and ripple peak voltage shall not exceed the rated working voltage)when the
capacitors are restored to 20 ℃, the capacitors shall meet the limits specified bellow.
Duration
Endurance
ø10 : 4000 h, ø12.5 : 5000 h
Capacitance change
Dissipation factor(tan δ) ≦ 300 % of the initial limit
DC leakage current Within the initial limit
Within ±30 % of the initial value
After storage for 1000 h at +105 ℃±2 ℃ with no voltage applied and then being
stabilized at +20 ℃, capacitors shall meet the limits specified in endurance.
(With voltage treatment)
Shelf life
Frequency correction factor for ripple current
Freq.(Hz)
Cap.(μF)
510 to 1000
120
1 k
10 k
100 k to
0.65
0.75
0.75
0.80
0.95
1.00
1.00
1.00
1200 to 2000
Dimensions
Sleeve
Pressure relief
14min.
3min.
L*
øD±0.5
* L ≦ 16:L±1.5
L ≧ 20:L±2.0
Unit:mm
øD
L
ød
F
10.0
16 to 20
0.6
12.5
20 to 25
0.6
5.0
5.0
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
20-Dec-19