Aluminum Electrolytic Capacitors/ EB
Radial Lead Type
Series:
Type:
EB
A
■ Features
Endurance : +105 °C 5000 h to 10000 h
Hight ripple hight frequency (Hight Voltage)
RoHS directive compliant
●
●
●
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
–40 °C to +105 °C
10 V.DC to 63 V.DC
0.47 µF to 3300 µF
–25 °C to +105 °C
160 V.DC to 450 V.DC
10 µF to 330 µF
20 % (120 Hz/+20 °C)
0.01 CV or 3 (µA)
I
<
DC Leakage Current
After 2 minutes application of rated working voltage at +20 °C (Whichever is greater)
tan
Please see the attached standard products list
δ
After following life test with DC voltage and +105 °C 2 °C ripple current value applied
(The sum of DC and ripple peak voltage shall not exceed the rated working voltage), when
the capacitors are restord to 20 °C, the capacitors shall meet the limits specified below.
(10 to 63 V.DC)
Duration : 5 11 to 8 11.5 : 5000 hours 5 15 to 6.3 15 : 7000 hours
φ ҂
φ ҂
φ ҂
φ
҂
8 15 to 12.5 25 : 10000 hours
φ ҂
Capacitance change
tan
φ
҂
30 % of initial measured value
300 % of initial specified value
initial specified value
Endurance
δ
<
<
DC leakage current
(160 to 450 V.DC)
Duration : 5000 hours
Capacitance change
20 % of initial measured value
200 % of initial specified value
initial specified value
tan
δ
<
<
DC leakage current
After storage for 1000 hours at +105 °C 2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Shelf Life
■ Frequency correction factor for ripple current
(10 ~ 63 V.DC)
Frequency (Hz)
120 1 k 10 k 100 k
Frequency (Hz)
Capacitance
(µF)
W. V.
(V. DC)
60
120
0.55
0.50
1 k
10 k to 30k 30 k to 100k
0.47 to
10
0.75 1.00 1.40 1.55 1.65
0.85 1.00 1.20 1.25 1.30
160 to 250
350 to 450
0.85
0.80
0.90
0.90
1.00
1.00
22
1000
to 470
to 3300
0.95 1.00 1.05 1.10
1.15
■ Dimensions in mm (not to scale)
Sleeve
φ5 to φ8
φ10<
[mm]
φd 0.05
Pressure relief
φ6.3<
+
–
L✽
14 min.
3 min.
φD 0.5
φD 0.5
✽ L<16 : L 1.0 (φ8҂15 only L 1.5)
L>20 : L 2.0
(mm)
Body Dia. D
5
0.5
2.0
6.3
0.5
2.5
8
0.6
3.5
10
0.6
5.0
12.5
0.6
5.0
16
0.8
7.5
18
0.8
7.5
φ
Lead Dia. d
φ
Lead space F
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 Sep. 2010
– EE104 –