Aluminum Electrolytic Capacitors/EX
Snap-in Type
Type : TS
Series:
EX
■ Features
VDE-0860 specification
Endurance : 105°C 2000 h
Japan
■ Recommended Applications
Smoothing circuits, AC adaptor
■ Specifications
Category temp. range
-25 to + 105°C
250 V .DC
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
100 to 1200 µ F
±20 % (120Hz/+20°C)
(µA) max. after 5 minutes application of rated working voltage at +20°C
Capacitance(µF) V: W.V. (V.DC)
3ÖCV
DC Leakage Current
Please see the attached standard products list
Dissipation Factor
Frequency (Hz)
Correction Factor
50
60
100
120
500
1k
10k to
1.15
Frequency Correction
Factor for Ripple Current
0.93
0.95
0.99
1.00
1.05
1.08
After applying 360V.DC for 7 hours at following either temperature, capacitor shall not
short-circuit or vent shall not operate.
Over voltage
Condition (A) at 70°C
Condition (B) at 35°C
characteristics
After 2000 hours application of DC voltage with specified ripple current (< rated DC working
voltage) at +105°C, the capacitor shall meet the following limits.
Endurance
Shelf Life
Capacitance change
D.F.
DC leakage current
±20 % of initial measured value
< 200 % of initial specified value
< initial specified value
After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in “Endurance”.(With voltage treatment)
■ Dimensions in mm (not to scale)
2-φ2.0±0.1
10.0±0.1
(10.0)
Polarity bar
Vent
P.V.C. sleeve
L+2.0 max
Recommended PWB piercing plan
Terminal
❉
(Standard terminal type)
+0.2
0.8-0.1
+0.2
(t=0.8)
2.0max
0.8-0.1
2.0max
❉
❉
Top of spin
Top of spin
1.5 ± 0.2
1.5±0.2
Standard terminal type does not require
for cutting off process for terminals.
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail.
Mar. 2005
Ñ EE173 Ñ