5秒后页面跳转
捷配首页

Datasheet > EB41D12SGW15
EB41D12SGW15 PDF预览

EB41D12SGW15

更新时间： 2024-11-29 16:09:39
品牌 Logo 应用领域
威世 - VISHAY 局域网连接器
页数 文件大小 规格书
3页 130K
描述
CONNECTOR, EDGE CONNECTOR,CABLE MNT,24 CONTACTS,2,SOLDER TERMINAL

阅读下载

中文翻译

获取价格

EB41D12SGW15 技术参数

生命周期：ObsoleteReach Compliance Code：unknown
ECCN代码：EAR99HTS代码：8536.69.40.40
风险等级：5.57Is Samacsys：N
其他特性：NO FLANGE主体宽度：0.365 inch
主体深度：0.61 inch主体长度：1.46 inch
连接器类型：CARD EDGE CONNECTOR接触器设计：PREASSEM CONN
联系完成配合：AU ON NI触点材料：PHOSPHOR BRONZE
触点模式：RECTANGULAR触点电阻：30 m Ω
触点样式：BELLOWED TYPE介电耐压：650VAC V
耐用性：500 Cycles绝缘电阻：5000000000 Ω
绝缘体颜色：GREEN绝缘体材料：GLASS FILLED DIALLYL PHTHALATE
插接触点节距：0.1 inch匹配触点行间距：0.2 inch
安装类型：PANEL装载的行数：2
最高工作温度：125 °C最低工作温度：-65 °C
电镀厚度：30u inch额定电流（信号）：3 A
参考标准：UL可靠性：COMMERCIAL
子类别：Headers and Edge Type Connectors端子长度：0.115 inch
端接类型：SOLDER LUG触点总数：24
撤离力-最小值：.1668 NBase Number Matches：1

EB41D12SGW15 数据手册

 浏览型号EB41D12SGW15的Datasheet PDF文件第2页浏览型号EB41D12SGW15的Datasheet PDF文件第3页 
EB4  
Vishay Dale  
Edgeboard Connectors, Dual Readout, 0.100" [2.54mm] C-C,  
Standard and Right Angle Terminals  
FEATURES  
• Grid Patterns: 0.100" C-C x 0.150" [2.54mm x 3.81mm]  
and 0.100" C-C x 0.200" [2.54mm x 5.08mm].  
• Standard and right angle terminals.  
• Greater design latitude:  
4 body materials: Diallyl phthalate, phenolic, glass-filled  
polyester and glass-filled polyphenylene sulfied.  
7 contact termination styles - 3 Standard, 4 Right Angle.  
20 body sizes and 6 mounting styles.  
• Selective gold plating.  
• Accepts PC board thickness of 0.054" to 0.071" [1.37mm  
to 1.80mm].  
• Polarization between contact positions in all sizes.  
Between contact polarization permits polarizing without loss  
of contact position.  
ELECTRICAL SPECIFICATIONS  
Current Rating: 3 amps.  
Test Voltage Between Contacts:  
At sea level: 650VRMS.  
At 70,000 feet [21,336 meters]: 275VRMS.  
• Recognized under the Component Program of  
Underwriters Laboratories, Inc. Listed under File  
E65524, Project 77CH3889.  
Insulation Resistance: 5000 Megohm minimum at 500VDC  
potential.  
APPLICATIONS  
For use with 0.0625" [1.59mm] printed circuit boards requiring  
an edgeboard type connector on 0.100" [2.54mm] centers.  
Contact Resistance: 30 millivolts maximum at rated current  
(with gold plating).  
MATERIAL SPECIFICATIONS  
Operating Temperature: - 65°C to + 125°C.  
Humidity: 96 hours at 90% relative humidity at + 40°C, dried  
at room temperature for 3 hours minimum, insulation  
resistance was greater than 5000 Megohm.  
Body Material:  
“1” glass-filled diallyl phthalate per MIL-M-14, Type SDG-F  
green, flame retardant (UL 94V-0).  
Durability: After 500 cycles of insertion and withdrawal of a  
0.070" [1.78mm] thick steel test board, contact resistance  
less than 0.030V at 3 amps on gold plated contacts and  
individual contact pair separation force when measured with  
a 0.054" [1.37mm] thick steel test blade was greater than  
1/2 ounce.  
“2” glass-filled phenolic per MIL-M-14, Type MFH dark  
green, flame retardant (UL 94V-0).  
“3” thermoplastic polyester, glass-filled, black, flame  
retardant (UL 94V-0).  
“5” thermoplastic polyphenylene sulfied, glass filled, brown,  
flame retardant (UL 94V-0).  
Shock: Three 50g shocks in each of 3 mutually  
perpendicular planes with no loss of continuity.  
Contacts: Phosphor bronze. (See Ordering Information.)  
Vibration: 2 hours in each of 3 mutually perpendicular  
planes, frequency sweep 10 to 55cps at 0.06 double  
amplitude with no loss of continuity.  
Polarizing Key: Glass reinforced nylon, flame retardant  
(UL 94H-B).  
Plating: Gold. (Ordering Information.)  
ORDERING INFORMATION  
EB4  
3
K
20  
SG  
X
15  
MODEL  
BODY MATERIAL STANDARD  
TERMINAL  
CONTACTS  
CONTACT PLATING  
MOUNTING  
VARIATIONS  
POLARIZING  
KEY POSITIONS  
VARIATIONS  
C, D, K,  
1R, 2R,  
3R, 4R  
6, 10, 12,  
1 = Diallyl  
Phthalate  
2 = Phenolic  
3 = Glass-filled  
Polyester  
5 = Glass-filled  
Polyphenylene  
Sulfied  
Key(s) are located to  
right of position(s)  
designated. Use odd-  
numbered contact for  
ordering: -1, -3, -5, etc.  
Required only when  
polarizing keys are to  
be factory installed.  
NOTE: To order  
SG = Selective Gold Plating  
15, 18, 20,  
22, 25, 28,  
30, 31, 35,  
36, 40, 43,  
44, 48, 49,  
50, 60 and  
65 per side.  
(0.00003" [0.000762mm] minimum  
thick) on contact area with Gold  
Flash on terminal.  
SGF = Selective Gold Plating  
(0.000010" [0.000254mm]  
minimum thick) on contact area  
with Gold Flash on terminal.  
All Gold Plating over 0.00005"  
[0.00127mm] minimum Nickel  
Underplate.  
polarizing keys  
individually, specify  
Model PK-4.  
Contact factory for additional  
plating options.  
For technical questions, contact Connectors@vishay.com  
www.vishay.com  
2
Document Number 36001  
Revision 14-Aug-02  
123

中文翻译

下载PDF

与EB41D12SGW15相关器件

型号 品牌 获取价格 描述 数据表
EB41D12SGX15 VISHAY

获取价格

 		Edgeboard Connectors, Dual Readout, 0.100" (2.54 mm) C-C, Standard and Right Angle Termina
EB41D12SGXF15 VISHAY

获取价格

 		CONNECTOR, EDGE CONNECTOR,CABLE MNT,24 CONTACTS,2,SOLDER TERMINAL,HOLE .125-.137
EB41D12SGXFS VISHAY

获取价格

 		CONNECTOR, 12 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, SOLDER
EB41D12SGXS VISHAY

获取价格

 		CONNECTOR, 12 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, SOLDER
EB41D12SGYF VISHAY

获取价格

 		CONNECTOR, 24 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, SOLDER
EB41D15 VISHAY

获取价格

 		Edgeboard Connectors, Dual Readout, 0.100" [2.54mm] C-C, Standard and Right Angle Terminal
EB41D15SGFW VISHAY

获取价格

 		CONNECTOR, 30 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, SOLDER
EB41D15SGFW15 VISHAY

获取价格

 		Card Edge Connector, 30 Contact(s), 2 Row(s), 0.1 inch Pitch, Solder Lug Terminal, Green I
EB41D15SGFX VISHAY

获取价格

 		Card Edge Connector, 30 Contact(s), 2 Row(s), Female, Straight, Solder Terminal,
EB41D15SGFY15 VISHAY

获取价格

 		CONNECTOR, EDGE CONNECTOR,CABLE MNT,30 CONTACTS,2,SOLDER TERMINAL,#4-40

与EB41D12SGW15相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证