DBE/DVE Series
www.murata-ps.com
Up to 300W Digital Fully Regulated Intermediate
DC-DC Bus Converter
Output (V)
Current (A)
Input (Vdc)
3.3
5
40
40
25
V2 = 36-75Vdc
ꢀ2
Typical unit
FEATURES
PRODUCT OVERVIEW
Murata Power Solutions is introducing the first in
a series of digitally controlled DC-DC converters
that are based on a 32-bit ARM processor. The
DBE series provides a fully regulated, digitally
controlled DC output in an eighth-brick format that
will support the evolving, Advanced Bus Converter
(ABC) industry standard footprint for isolated board
mounted power modules. The DBE series supports
TNV standard for input Voltage with a 36–75Vin
specified Vin range and was designed to provide
payload power in distributed power architectures.
The DBE offers a “droop” load sharing option for
paralleling modules in the most demanding, power
hungry applications or to provide redundancy in
high reliability applications. The converter also
offers high input to output isolation of 2250 VDC as
ꢀ
Advanced Bus Converter industry standard
eighth-brick with digital PMBus interface
ꢀ
Optional standard five pin Eighth-brick
ꢀ
High efficiency
ꢀ
Fast dynamic response
ꢀ
ꢀ1 Vout Setting accuracy
ꢀ
2250 Vdc input to output isolation voltage
advances in power conversion technology including required for Power over Ethernet (PoE) applications.
ꢀ
Optional baseplate (B option)
a digital interface supporting the PMBus protocol
for communications to power modules.
The DBE series products are eighth-brick
DC-DC converter with a digital interface support-
ing the PMBus standard for communicating with
power devices. The DBE series also supports the
The DBE series is suitable for applications covering
MicroTCA, servers and storage applications, net-
working equipment, Power over Ethernet (PoE), fan
trays, wireless networks, wireless pre-amplifiers,
industrial and test equipment along with other
applications requiring a regulated ꢀ2V and 5V.
ꢀ
Voltage droop load sharing for parallel operation
ꢀ
Certified to UL/EN/IEC 60950-ꢀ, CAN/CSA-C22.2
No. 60950-ꢀ, 2nd Edition, safety approvals and
EN55022/CISPR22 standards
Power Management (PMBus Options)
Applications
ꢀ
ꢀ
Configurable soft-start/stop
Distributed power architectures
ꢀ
Configurable output voltage (Vout) and voltage
ꢀ
Intermediate bus voltage applications
margins (Margin low and Margin high)
ꢀ
Servers and storage applications
ꢀ
Configurable protection limits for OVP, input over
voltage, input under voltage, over current, on/
off, and temperature
ꢀ
Network equipment
ꢀ
Module Status monitor Vout, Iout, Vin, Temp,
Power good, and On/Off
ꢀ
System status monitor (Vout, Iout, Vin and Temp
over time)
PM
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
SDC_DBE Series.A06∆ Page ꢀ of 34