PRELIMINARY
a+
DS32501/DS32502/DS32503/DS32504
Single-/Dual-/Triple-/Quad-Port
DS3/E3/STS-1 LIUs
www.maxim-ic.com
GENERAL DESCRIPTION
FEATURES
ꢀ
Pin-Compatible Family of Products
The DS32501 (single), DS32502 (dual), DS32503
(triple), and DS32504 (quad) line interface units ꢀ Each Port Independently Configurable
(LIUs) are highly integrated, low-power, feature-rich
ꢀ
Receive Clock and Data Recovery for Up to
457 meters (1500 feet) of 75Ω Coaxial Cable
Standards-Compliant Transmit Waveshaping
Uses 1:1 Transformers on Both Tx and Rx
LIUs for DS3, E3, and STS-1 applications. Each LIU
port in these devices has independent receive and
transmit paths, a jitter attenuator, a full-featured
pattern generator and detector, performance
ꢀ
ꢀ
ꢀ
Three Control Interface Options: 8/16-Bit
Parallel, SPI, and Hardware Mode
monitoring counters, and
a
complete set of
loopbacks. An on-chip clock adapter generates all
line-rate clocks from a single input clock. Ports are
independently software configurable for DS3, E3, and
STS-1 and can be individually powered down.
Control interface options include 8-bit parallel, SPI,
and hardware mode.
ꢀ
Jitter Attenuators (One Per Port) Can be
Placed in the Receive Path or the Transmit
Path
ꢀ
ꢀ
Jitter Attenuators Have Provisionable Buffer
Depth: 16, 32, 64, or 128 Bits
Built-In Clock Adapter Generates All Line-
Rate Clocks from a Single Input Clock (DS3,
E3, STS-1, 12.8MHz, 19.44MHz, 38.88MHz,
77.76MHz)
APPLICATIONS
SONET/SDH and PDH
Multiplexers
Digital Cross-Connects
Access Concentrators
PBXs
ATM and Frame Relay
Equipment
ꢀ
ꢀ
Per-Port Programmable Internal Line
Termination Requiring Only External
Transformers
DSLAMs
WAN Routers and
Switches
CSU/DSUs
High-Impedance Tx and Rx, Even When
VDD = 0, Enables Hot-Swappable, 1:1, and 1+1
Board Redundancy Without Relays
ORDERING INFORMATION
ꢀ
ꢀ
Per-Port BERT for PRBS and Repetitive
Pattern Generation and Detection
PART
LIUs TEMP RANGE PIN-PACKAGE
DS32501*
DS32501N*
DS32502*
DS32502N*
DS32503*
DS32503N*
DS32504*
DS32504N*
1
1
2
2
3
3
4
4
0°C to +70°C
-40°C to +85°C 144 TE-CSBGA
0°C to +70°C 144 TE-CSBGA
-40°C to +85°C 144 TE-CSBGA
0°C to +70°C 144 TE-CSBGA
-40°C to +85°C 144 TE-CSBGA
0°C to +70°C 144 TE-CSBGA
-40°C to +85°C 144 TE-CSBGA
144 TE-CSBGA
Tx and Rx Open- and Short-Detection
Circuitry
ꢀ
ꢀ
Transmit Driver Monitor Circuitry
Receive Loss-of-Signal (LOS) Monitoring
Compliant with ANSI T1.231 and ITU G.775
ꢀ
ꢀ
Automatic Data Squelching on Receive LOS
Large Line Code Performance Monitoring
Counters for Accumulation Intervals Up to 1s
Note: Add “+” for the lead-free package option.
*Future product—contact factory for availability.
ꢀ
ꢀ
ꢀ
ꢀ
Local and Remote Loopbacks
Transmit Common Clock Option
Power-Down Capability for Unused Ports
Functional Diagram appears in Section 3 (see
Figure 3-1).
Low-Power 1.8V/3.3V Operation (5V Tolerant
I/O)
ꢀ
ꢀ
ꢀ
Industrial Temperature Range: -40°C to +85°C
Small Package: (13mm)2 144-Pin TE-CSBGA
IEEE 1149.1 JTAG Support
Note: Some revisions of this device may incorporate deviations from published specifications known as errata. Multiple revisions of any device
may be simultaneously available through various sales channels. For information about device errata, click here: www.maxim-ic.com/errata.
1 of 124
REV: 042007