Datasheet > DS1065

DS1065

更新时间： 2024-11-18 23:16:31

品牌	Logo	应用领域
达拉斯 - DALLAS		/
页数	文件大小	规格书
10页	185K
描述
EconOscillator/Divider

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

DS1065 数据手册

PRELIMINARY

DS1065

EconOscillator/Divider

www.dalsemi.com

FEATURES

PIN ASSIGNMENT

C 30 kHz to 100 MHz output frequencies

C User-programmable on-chip dividers (from 1-

513)

Dallas

DS1065

C User-programmable on-chip prescaler (1, 2,

C No external components

C M0.5% initial tolerance

C M3% variation over temperature and voltage

C Single 5V supply

1 2

FREQUENCY OPTIONS

BOTTOM

VIEW

Part No.

Max O/P freq.

100.000 MHz

80.000 MHz

66.667 MHz

60.000 MHz

DS1065-100

DS1065-80

DS1065-66

DS1065-60

PIN DESCRIPTION

TO-92

1 I/O

- Input/Output

- Power Supply

- Ground

2 V_CC

3 GND

DESCRIPTION

The DS1065 is a fixed frequency oscillator requiring no external components for operation. Numerous

operating frequencies are possible in the range of approximately 30 kHz to 100 MHz through the use of

an on-chip programmable prescaler and divider.

The DS1065 features a master oscillator followed by a prescaler and then a programmable divider. The

prescaler and programmable divider are user-programmable with the desired values being stored in

nonvolatile memory. This allows the user to buy an off the shelf component and program it on site prior

to board production. Design changes can be accommodated easily by simply programming different

values into the device (or reprogramming previously programmed devices). The DS1065 is shipped from

the factory configured for half the maximum operating frequency. Contact the factory for specially

programmed devices.

The DS1065 features a dual-purpose Input/Output pin. If the device is powered up in Program mode this

pin can be used to input serial data to the on-chip registers. After a write command this data is stored in

nonvolatile memory. When the chip is subsequently powered up in operating mode these values are

automatically restored to the on-chip registers and the Input/Output pin becomes the oscillator output.

The DS1065 is available in TO-92 (3 LEAD) package, allowing the generation of a clock signal easily,

economically and using minimal board area.

1 of 10

011200

12 3 4 5 6 7...10

中文翻译

下载PDF

与DS1065相关器件

型号	品牌	获取价格	描述	数据表
DS1065-100	DALLAS	获取价格	EconOscillator/Divider
DS1065-60	DALLAS	获取价格	EconOscillator/Divider
DS1065-66	DALLAS	获取价格	EconOscillator/Divider
DS1065-80	DALLAS	获取价格	EconOscillator/Divider
DS1065T-100	ETC	获取价格	IC-OSC/DIVIDER
DS1065T-60	ETC	获取价格	IC-OSC/DIVIDER
DS1065T-66	ETC	获取价格	IC-OSC/DIVIDER
DS1065T-80	ETC	获取价格	IC-OSC/DIVIDER
DS106C2	TOKO	获取价格	Fixed Inductors for Surface Mounting
DS106CB	TOKO	获取价格	Fixed Inductors for Surface Mounting