5秒后页面跳转
DS1065T-80 PDF预览

DS1065T-80

更新时间: 2024-11-18 23:48:31
品牌 Logo 应用领域
其他 - ETC /
页数 文件大小 规格书
10页 210K
描述
IC-OSC/DIVIDER

DS1065T-80 数据手册

 浏览型号DS1065T-80的Datasheet PDF文件第2页浏览型号DS1065T-80的Datasheet PDF文件第3页浏览型号DS1065T-80的Datasheet PDF文件第4页浏览型号DS1065T-80的Datasheet PDF文件第5页浏览型号DS1065T-80的Datasheet PDF文件第6页浏览型号DS1065T-80的Datasheet PDF文件第7页 
PRELIMINARY  
DS1065  
EconOscillator/Divider  
www.dalsemi.com  
FEATURES  
PIN ASSIGNMENT  
§ 30 kHz to 100 MHz output frequencies  
§ User-programmable on-chip dividers (from 1-  
513)  
Dallas  
DS1065  
§ User-programmable on-chip prescaler (1, 2,  
4)  
§ No external components  
§ ±0.5% initial tolerance  
§ ±3% variation over temperature and voltage  
§ Single 5V supply  
1 2  
1 2  
3
3
BOTTOM  
VIEW  
FREQUENCY OPTIONS  
Part No.  
Max O/P freq.  
100.000 MHz  
80.000 MHz  
66.667 MHz  
60.000 MHz  
DS1065-100  
DS1065-80  
DS1065-66  
DS1065-60  
PIN DESCRIPTION  
TO-92  
1 I/O  
2 VCC  
3 GND  
- Input/Output  
- Power Supply  
- Ground  
DESCRIPTION  
The DS1065 is a fixed frequency oscillator requiring no external components for operation. Numerous  
operating frequencies are possible in the range of approximately 30 kHz to 100 MHz through the use of  
an on-chip programmable prescaler and divider.  
The DS1065 features a master oscillator followed by a prescaler and then a programmable divider. The  
prescaler and programmable divider are user-programmable with the desired values being stored in  
nonvolatile memory. This allows the user to buy an off the shelf component and program it on site prior  
to board production. Design changes can be accommodated easily by simply programming different  
values into the device (or reprogramming previously programmed devices). The DS1065 is shipped from  
the factory configured for half the maximum operating frequency. Contact the factory for specially  
programmed devices.  
The DS1065 features a dual-purpose Input/Output pin. If the device is powered up in Program mode this  
pin can be used to input serial data to the on-chip registers. After a write command this data is stored in  
nonvolatile memory. When the chip is subsequently powered up in operating mode these values are  
automatically restored to the on-chip registers and the Input/Output pin becomes the oscillator output.  
The DS1065 is available in TO-92 (3 LEAD) package, allowing the generation of a clock signal easily,  
economically and using minimal board area.  
1 of 10  
093099  

与DS1065T-80相关器件

型号 品牌 获取价格 描述 数据表
DS106C2 TOKO

获取价格

Fixed Inductors for Surface Mounting
DS106CB TOKO

获取价格

Fixed Inductors for Surface Mounting
DS-107-09-P-B-A-D MARKTECH

获取价格

D Type Connector, 9 Contact(s), Male, 0.109 inch Pitch, Solder Terminal, #4-40, Receptacle
DS-107-09-P-B-NA-B MARKTECH

获取价格

D Type Connector, 9 Contact(s), Male, 0.109 inch Pitch, Solder Terminal, Receptacle
DS-107-09-P-B-NA-D MARKTECH

获取价格

D Type Connector, 9 Contact(s), Male, 0.109 inch Pitch, Solder Terminal, #4-40, Receptacle
DS-107-09-P-K-NK-D MARKTECH

获取价格

D Type Connector, 9 Contact(s), Male, 0.109 inch Pitch, Solder Terminal, Receptacle
DS-107-09-P-W-A-D MARKTECH

获取价格

D Type Connector, 9 Contact(s), Male, 0.109 inch Pitch, Solder Terminal, #4-40, Receptacle
DS-107-09-P-W-K-B MARKTECH

获取价格

D Type Connector, 9 Contact(s), Male, 0.109 inch Pitch, Solder Terminal, #4-40, Receptacle
DS-107-09-P-W-K-D MARKTECH

获取价格

D Type Connector, 9 Contact(s), Male, 0.109 inch Pitch, Solder Terminal, Receptacle
DS-107-09-P-W-NK-D MARKTECH

获取价格

D Type Connector, 9 Contact(s), Male, 0.109 inch Pitch, Solder Terminal, Receptacle