DR-1 1 5 2 5
1 6 -BIT HIGH FREQUENCY HYBRID
DIGITAL-TO-RES OLVER D/R CONVERTER
FEATURES
DESCRIPTION
Accuracy Up to 1 Minute
The DR-11525 is a versatile multiply- can drive displays directly. The output
ing digital-to-resolver converter. The line-to-ground voltage can be scaled by
digital input represents an angle, and external resistors. The DR-11525 also
the output is resolver type, sin/cos. includes high ac and dc common mode
The reference input will accept any rejection at the reference input
waveform, even a sawtooth for CRT
•
•
•
Operational Up to 10 kHz
2 Vrms, 6.81 Vrms, 11.8 VL-L, or
Scalable Resolver Outputs
drive. Because the reference is dc-
coupled to the output, the DR-11525
can be used as: a digital-to-resolver
converter using a sinusoidal refer-
2 mA rms Output
16-Bit Resolution
•
•
•
APPLICATIONS
Because of its high reliability, small size
ence as an input; a digital-to-sin/cos
and low power consumption, the hybrid
dc converter using a dc reference; or
DR-11525 is ideal for the most stringent
8-Bit/2-Byte Double Buffered
Transparent Latches
a polar-to-rectangular converter using
and severe industrial and military
a reference input proportional to the
ground or avionics applications. All units
radius vector; or a rotating cartwheel
are available with MIL-PRF-38534 pro-
DC-Coupled Reference Accepts
Any Waveform
•
sweep generator for PPI displays
cessing as a standard option.
using a sawtooth reference.
Among the many possible applica-
High-Rel CMOS D/R Chip
No +5 V Supply Required
Packaged in a 36-pin DDIP, the DR-
tions are computer-based systems in
•
•
11525 is a complete D/R converter in
which digital angle information is
one hybrid module. Hybrid technology
processed, such as synchro/resolver
results in low weight, low power con-
simulators, flight trainers, flight instru-
sumption, very high reliability, and a
mentation, fire control systems, IR,
wide operating temperature range. The
radar and navigation systems. In addi-
DR-11525 circuit design allows for high-
tion, the DR-11525 is ideal for motor
er accuracy and reduces the output
and robotic control test systems.
scale factor variation so that the output
TEST POINT - R
REFERENCE INPUTS
RESOLVER
OUTPUTS
13.37 k
13.37 k
36.71 k
36.71 k
49.92 k
49.92 k
+S
+C
D/R CONVERTER
HIGH ACCURACY
LOW SCALE FACTOR
VARIATION
S1
DIFFERENTIAL 26 V
(NOTE 1)
S2
REFERENCE
CONDITIONER
RESOLVER SCALING
OUTPUT AMPLIFIERS
BITS 1-16
S3
S4
SINGLE-ENDED 26 V
(NOTE 2)
TRANSPARENT
LATCH
TRANSPARENT
LATCH
ADJUSTABLE 4.4 V
(NOTE 3)
BITS 1-8 BITS 9-16
DIGITAL INPUT
LL
LA
LM
NOTES: 1) 26 VRMS REFERENCE IN = 11.8 V
DIFFERENTIAL OUTPUT
L-L
2) 26 VRMS REFERENCE IN = 6.8 VRMS SINGLE-ENDED OUTPUT
3) 4.4 VRMS REFERENCE IN = 2 VRMS SINGLE-ENDED OUTPUT
FIGURE 1. DR-11525 BLOCK DIAGRAM
© 1996, 1999 Data Device Corporation