Dual Output
Mixed Voltage, DLV Models
37 Watt, Isolated DC/DC Converters
OUT Combinations of 3.3/2.5/1.8/1.5 Volts
V
Murata’s new DLV Series, dual-output, low-voltage DC/DC’s provide any output
combination of 3.3V (to 6 Amps) and 2.5/1.8/1.5 (to 7 Amps). Designed with two
control loops for two independently regulated outputs (both using synchronous rec-
tification), DLV’s are impressively efficient (to 85%) and able to supply their full 13
Amps of output current (37W for the 3.3V/2.5V models) up to +60°C ambient with
no derating (model dependent).
Housed in standard 2" x 2" x 0.5" plastic packages, DLV’s offer a number of
functional options (positive or negative polarity on the control pin, addition of second
VOUT trim pin, etc.) that make them pin compatible with, yet more powerful than,
virtually all 2" x 2" duals from other leading DC/DC manufacturers.
Assembled using fully automated, SMT-on-pcb techniques, DLV’s provide
stable no-load operation, excellent line/load regulation ( 1%), quick step response
(200µsec), and low output ripple/noise (80mVp-p). All devices feature full I/O fault
protection including: input overvoltage and undervoltage shutdown, output overvolt-
age protection, current limiting, short-circuit protection, and thermal shutdown.
All DLV models are Qual/HALT/EMI tested and certified to the operational/func-
tional-insulation requirements of UL60950/EN60950. 48VIN models (75VIN max.)
carry the CE mark Selected models include RoHS-5 compliance with the lead
exception.
Features
Two independently regulated outputs:
3.3V @ 6A; 2.5/1.8/1.5 @ 7A
ꢀ
ꢀ
ꢀ
13A/37W total output current/power
Input voltage ranges:
10-18V, 18-36V or 36-75V
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Standard 2" x 2" package/pinout
High efficiency (to 85%)
Stable no-load operation
Independent VOUT trim pins
Remote on/off control
Fully isolated (1500Vdc); I/O protected
Output overvoltage protection
Thermal shutdown
UL60950/EN60950 certified
CE marked
V1 OUTPUT
+INPUT
–INPUT
SWITCH
CONTROL
OUTPUT
RETURN
PWM
CONTROLLER
OPTO
ISOLATION
REFERENCE &
ERROR AMP
INPUT UNDERVOLTAGE
AND OVERVOLTAGE
COMPARATORS
➁
V1 TRIM
(OPTION)
ON/OFF
CONTROL
V2 TRIM
PWM
CONTROLLER
OPTO
ISOLATION
REFERENCE &
ERROR AMP
SYNC
(OPTION)
➀
V2 OUTPUT
➀ Contact Murata.
➁ V1 is the higher of the
two output voltages.
SWITCH
CONTROL
Figure 1. Simplified Schematic
www.murata-ps.com/support