The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
DF22 Series
Complete
Locking
Function
Completely
enclosed
locking system
Protection from
shorts circuits
between adjacent
Contacts
■Features
Prevention of Incorrect Connections
1. 30 A maximum current
Single position connector can carry current of 30 A with #10 AWG
conductor. Please refer to Table #1 for current ratings for multi-
position connectors using other conductor sizes.
●R Type (Guide key: right side, Color: black
)
2. Complete Locking Function
Reliable interior lock protects mated connectors from accidental
disconnection.
3. Prevention of Incorrect Connections
To prevent incorrect connection when using multiple connectors
having the same Number of contacts, 3 product types having
different mating configurations are available.
4. Molded-in contact retention tabs
Handling of terminated contacts during the crimping is easier
and avoids entangling of wires, since there are no protruding
metal tabs.
●Standard Type (Guide key: inside, Color: natural)
5. Prevention of incorrect board placement
Built-in posts assure correct connector placement and
orientation on the board.
6. Supports encapsulation
Connectors can be encapsulated up to 10 mm without affecting
the performance.
7. Prevention of Short Circuits Between Adjacent Contacts
Each Contact is completely surrounded by the insulator housing
electrically isolating it from adjacent contacts.
●L Type (Guide key: left side, Color: red
)
8. Increased Retention Force of Crimped Contacts
and confirmation of complete contact insertion
Separate contact retainers are provided for applications where
extreme pull-out forces may be applied against the wire or when a
visual confirmation of the full contact insertion is required.
9. Full Line of Crimp Socket Contacts
Realizing the market needs for multitude of different applications,
Hirose has developed several variants of crimp socket contacts
and housings. Continuous development is adding different
variations. Contact your nearest Hirose Electric representative
for latest developments.
*The photographs on the left show header (the board
dip side), the photographs on the right show the
socket (cable side).
*The guide key position is indicated in position facing
the mating surface of the header.
10. In-line Connections
Connectors can be ordered for in-line cable connections. In
addition, assemblies can be placed next to each other allowing
4 position total (2 ∞ 2) in a small space.
11. Listed by UL, C-UL, and TÜV.
2010.9
1