DBW Series
Single and Dual Outputs
4:1 Ultra Wide Input Voltage Range
FEATURES
UL
TUV
● High Efficiency up to 88%
CB
CE MARK
● RoHS Directive Compliant
● Fixed Switching Frequency
● Six-Sided Continuous Shield
● 40 Watts Maximum Output power
● Single and Dual Outputs Available
● 4:1 Ultra Wide Input Voltage Range
● Standard 2.02” x 2.02” x 0.4” Package
SPECIFICATIONS: DBW Series
All specifications apply @ 25°C ambient unless otherwise noted
INPUT SPECIFICATIONS
PROTECTION SPECIFICATIONS
Input Voltage Range ............ 24V nominal input........................ 9 - 36VDC
Over Voltage Protection ...................................3.3V Output.................3.9V
48V nominal input...................... 18 - 75VDC
(Zener diode clamp)
5V Output....................6.2V
12V Output...................15V
15V Output...................18V
±12V Output...............±15V
±15V Output...............±18V
Under Voltage Lockout
24V nominal input........... DC-DC ON..........................................9 VDC
DC-DC OFF........................................8 VDC
48V nominal input........... DC-DC ON........................................18 VDC
DC-DC OFF......................................16 VDC
Over Load Protection (% of FL at nominal input) ....................... 150% max.
Short Circuit Protection......................................Hiccup, automatic recovery
Over Temperature Protection.......................................................110°C typ.
Input Filter....................................................................................... Pi Type
Input Voltage Variation......... dv/dt............................................ 5V/ms max
(Complies with ETS300 132 part 4.4)
GENERAL SPECIFICATIONS
Input Surge Voltage (100ms max) ............... 24V input ...................50VDC
48V input .................100VDC
Efficiency ........................................................................................see table
Switching Frequency .................................................................300KHz typ.
Isolation Voltage (Input to Output).........................................1600VDC min.
Isolation Voltage (Input/Output to Case) ...............................1600VDC min.
Case Grounding (connect case to -Vin with decoupling Y cap) ........... TBD
Isolation Resistance ...............................................................109 ohms min.
Isolation Capacitance ............................................................. 1500pF max.
Input Reflected Ripple Current (nominal Vin and FL) ...................20mAp-p
Start Up Time (nominal Vin and constant resistive load)
Power Up..............................................................................20ms max.
Remote ON/OFF ..................................................................20ms max.
Remote ON/OFF (See Note 4)
Positive Logic ................ DC-DC ON................Open or 3V < Vr < 12V
DC-DC OFF.............Short or 0V < Vr < 1.2V
Negative Logic ............... DC-DC ON...............Short or 0V < Vr < 1.2V
ENVIRONMENTAL SPECIFICATIONS
DC-DC OFF..............Open or 3V < Vr < 12V
Operating Ambient Temperature............. -40°C to +55°C (without derating)
Remote Off Input Current (nominal Vin) ..............................................3mA
+55°C to +105°C (with derating)
OUTPUT SPECIFICATIONS
Storage Temperature ..........................................................-55°C ~ +125°C
Maximum Case Temperature........................................................... +105°C
Relative Humidity...................................................................5% to 95% RH
Temperature Coefficient................................................... ±0.02% / °C max.
Output Voltage..............................................................................see table
Voltage Accuracy (nom Vin and full load)........................................... ±1%
Voltage Adjustability (See Note 1) ..................................................... ±10%
Output Current ..............................................................................see table
Output Power........................................................................ 40 watts max.
Line Regulation (LL to HL at FL)....................................................... ±0.2%
Load Regulation (See Note 2) ..................... Single Output............. ±0.5%
Thermal Impedance (See Note 6)
Without Heat-Sink..............................................................9.2°C / Watt
With Heat-Sink.....................................................................7.6°C/Watt
Thermal Shock .................................................................... MIL-STD-810D
Vibration ................................10~55Hz, 10G, 30 minutes along X, Y, and Z
(min. load to 100% load)
Dual Output ................... ±1%
MTBF (See Note 5) ........Bellcore TR-NWT-000332............ 1.105 x 106 hrs
Load Cross Regulation (See Note 3)........... Dual Output ................... ±5%
Minimum Load (See Note 8).........................................................see table
Ripple/Noise (See Note 9) ............................................................see table
MIL-STD-217F ............................. 1.511 x 105 hrs
Transient Response Recovery Time..................................................250us
(25% load step change)
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
5秒后页面跳转
共享储能电站：数据驱动与政策引领下的黄金机遇
US1M数据手册解读：产品特性、替换型号推荐
解析BAV99LT1G手册：参数分析、替换型号推荐
解读BSS138PW数据手册：产品特性、电气参数及替换型号推荐
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
