D AP, CRCW-AP
Vishay Draloric
Thick Film, Rectangular Chip Resistors
for Conductive Gluing
FEATURES
• AgPd-Terminations for conductive gluing
• Stability ΔR/R = 1 % for 1000 h at 70 °C
• Metal glaze on high quality ceramic
• Compliant to RoHS directive 2002/95/EC
• Halogen-free according to IEC 61249-2-21
definition
STANDARD ELECTRICAL SPECIFICATIONS
SIZE
RATED
LIMITING
ELEMENT
VOLTAGE
TEMPERATURE
COEFFICIENT
ppm/K
RESISTANCE
RANGE
Ω
DISSIPATION
TOLERANCE
%
MODEL
SERIES
P70
W
INCH METRIC
Umax. AC/DC
100
200
1
5
100R to 10M
10R to 10M
E24; E96
E24
0.063
50
D10 AP
D11 AP
D12 AP
D25 AP
0402 RR 1005M
0603 RR 1608M
0805 RR 2012M
1206 RR 3216M
Zero-Ohm-Resistor: Rmax. < 200 mΩ, Imax. = 0.5 A
100
200
1
5
18R to 10M
3R6 to 10M
E24; E96
E24
0.10
75
Zero-Ohm-Resistor: Rmax. < 200 mΩ, Imax. = 0.7 A
100
200
1
5
18R to 10M
3R6 to 10M
E24; E96
E24
0.125
150
Zero-Ohm-Resistor: Rmax. < 200 mΩ, Imax. = 0.8 A
100
200
1
5
18R to 10M
3R6 to 10M
E24; E96
E24
0.25
200
Zero-Ohm-Resistor: Rmax. < 200 mΩ, Imax. = 1.0 A
100
200
1
5
18R to 10M
3R6 to 10M
E24; E96
E24
0.50
200
CRCW1210-AP 1210 RR 3225M
CRCW1218-AP 1218 RR 3246M
CRCW2010-AP 2010 RR 5025M
CRCW2512-AP 2512 RR 6332M
Zero-Ohm-Resistor: Rmax. < 200 mΩ, Imax. = 1.5 A
100
200
1
5
18R to 2M2
3R6 to 2M2
E24; E96
E24
1.0
200
Zero-Ohm-Resistor: Rmax. < 200 mΩ, Imax. = 2.0 A
100
200
1
5
18R to 10M
3R6 to 10M
E24; E96
E24
0.75
400
Zero-Ohm-Resistor: Rmax. < 200 mΩ, Imax. = 1.8 A
100
200
1
5
18R to 10M
3R6 to 10M
E24; E96
E24
1.0
500
Zero-Ohm-Resistor: Rmax. < 200 mΩ, Imax. = 2.0 A
Notes
• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional time.
• Marking and packaging: See datasheet "Surface Mount Resistor Marking" (document number 20020)
• Power rating depends on the max. temperature at the joint point, the component placement density and the substrate material.
TECHNICAL SPECIFICATIONS
PARAMETER
Rated dissipation P70
UNIT D10 AP D11 AP D12 AP D25 AP CRCW1210-AP CRCW1218-AP CRCW2010-AP CRCW2512-AP
(1)
W
0.063
0.1
0.125
0.25
0.5
1.0
0.75
1.0
Limiting element voltage
Umax. AC/DC
V
50
75
150
200
200
200
400
500
Insulation voltage
Uins. (1 min)
Insulation resistance
Category temperature
range
V
> 75
> 100
> 200
> 300
> 300
> 300
> 300
> 300
Ω
> 109
°
C
- 55 to + 155
< 0.1 x 10- 9
Failure rate
h-1
Weight
mg
0.65
2
5.5
10
16
29.5
25.5
40.5
Note
(1) The power dissipation on the resistors generates a temperature rise against the local ambient, depending on the heat flow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceed.
Document Number: 20038
Revision: 29-Oct-10
For technical questions, contact: thickfilmchip@vishay.com
www.vishay.com
227