®
DAC811
For most current data sheet and other product
information, visit www.burr-brown.com
Microprocessor-Compatible
12-BIT DIGITAL-TO-ANALOG CONVERTER
Input gating logic is designed so that loading the last
FEATURES
● SINGLE INTEGRATED CIRCUIT CHIP
nibble or byte of data can be accomplished simulta-
neously with the transfer of data (previously stored in
adjacent latches) from adjacent input latches to the
D/A latch. This feature avoids spurious analog output
values while using an interface technique that saves
computer instructions.
● MICROCOMPUTER INTERFACE:
Double-Buffered Latch
● VOLTAGE OUTPUT: ±10V, ±5V, +10V
● MONOTONICITY GUARANTEED OVER
The DAC811 is laser trimmed at the wafer level and
is specified to ±1/4LSB maximum linearity error (B
and K grades) at 25°C and ±1/2LSB maximum over
the temperature range. All grades are guaranteed mono-
tonic over the specification temperature range.
TEMPERATURE
● ±1/2LSB MAXIMUM NONLINEARITY OVER
TEMPERATURE
● GUARANTEED SPECIFICATIONS AT ±12V
AND ±15V SUPPLIES
The DAC811 is available in six performance grades
and three package types. DAC811J and K are speci-
fied over the temperature ranges of 0°C to +70°C;
DAC811A and B are specified over –25°C to +85°C;
DAC811J and K are packaged in a reliable 28-pin
plastic DIP or plastic SO package, while DAC811A
and B are available in a 28-pin 0.6" wide dual-inline
hermetically sealed ceramic side-brazed package (H
package).
● TTL/5V CMOS-COMPATIBLE LOGIC
INPUTS
DESCRIPTION
The DAC811 is a complete, single-chip integrated-
circuit, microprocessor-compatible, 12-bit digital-to-
analog converter. The chip combines a precision volt-
age reference, microcomputer interface logic, and
double-buffered latch, in a 12-bit D/A converter with
a voltage output amplifier. Fast current switches and a
laser-trimmed thin-film resistor network provide a
highly accurate and fast D/A converter.
4 MSBs
4 LSBs
SJ
Input Latch
Input Latch
D/A Latch
Input Latch
RF
10V
Microcomputer interfacing is facilitated by a double-
buffered latch. The input latch is divided into three
4-bit nibbles to permit interfacing to 4-, 8-, 12-, or
16-bit buses and to handle right-or left-justified data.
The 12-bit data in the input latches is transferred to the
D/A latch to hold the output value.
RF
12-Bit D/A Converter
RBPO
VOUT
Voltage Reference
BPO
International Airport Industrial Park
•
Mailing Address: PO Box 11400, Tucson, AZ 85734
•
Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706
•
Tel: (520) 746-1111
Twx: 910-952-1111 Internet: http://www.burr-brown.com/
•
•
Cable: BBRCORP Telex: 066-6491
•
•
FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132
®
© 1983 Burr-Brown Corporation
Printed in U.S.A. April, 2000
PDS1-503L
DAC811
SBAS144