DA7282
LRA/ERM Ultra-Low Power Haptic Driver with
Multiple Input Triggers and Integrated
Waveform Memory
General Description
DA7282 is a linear resonant actuator (LRA) and eccentric rotating mass (ERM) haptic driver offering
automatic closed-loop LRA resonant frequency tracking. The feature guarantees consistency across
LRA production tolerances, operating temperature, aging, and mechanical coupling. DA7282 offers
wideband operation that fully utilizes the capabilities of newer wideband and multi-directional LRAs.
The differential output drive architecture and continuous actuator motion sensing enable efficient,
calibration-free playback and minimize software complexity. Featuring wake-up on General Purpose
Input (GPI) sequence triggers and/or I2C activity, DA7282 automatically returns to a low quiescent
current state (typically 0.68 µA) between playbacks. In OFF mode the device consumes only 5 nA
making it suitable for low power applications.
To reduce system complexity, an integrated Waveform Memory allows haptic sequences to be pre-
loaded to DA7282. Independent sequences can be triggered, with low-latency (0.75 ms), by up to
three separate input pins without host interaction. Haptic sequences can also be streamed to
DA7282 from an external source via I2C or pulse width modulated (PWM) signals.
DA7282 actively monitors the back electromotive force (BEMF) while continuously driving and
applies closed-loop Active Acceleration and Rapid Stopping for sharper clicks and a higher fidelity
user experience. This offers significant advantages over existing solutions that need to move into a
high-impedance state during drive to measure the BEMF, which adds a considerable amount of
inactive time to the sequence and lowers the effective click strength for a given LRA.
Key Features
■
■
■
■
■
LRA or ERM drive capability
■
No software requirements with embedded
operation
Automatic LRA resonant frequency tracking
Wideband LRA support
I2C and PWM input streaming
Low latency (0.75 ms) I2C/GPI wake-up from
low power consumption IDLE state,
IQ = 0.68 µA
■
■
Differential PWM output drive
Current driven system to deliver constant
actuator power
■
■
Automatic short circuit protection
Ultra-low power consumption, IQ = 5 nA, when
device is disabled
■
■
■
■
Ultra-low latency (0.15 ms) wake-up from
STANDBY state, IQ = 0.8 mA
■
■
Ultra-low power consumption, IQ = 0.68 µA,
with state retention in IDLE state
Three GPI pins for triggering of up to six
independent haptic sequences
Supply monitoring, reporting, and automatic
output limiting
On-board Waveform Memory with amplitude,
time, and frequency control
■
■
■
Open- and closed-loop modes
Custom wave drive support
Active Acceleration and Rapid Stop
technology for high-fidelity haptic feedback
Small solution footprint requiring only one
decoupling capacitor in both WLCSP and QFN
■
■
Actuator diagnostics and fault handling
Configurable EMI suppression
Datasheet
Revision 3.1
10-Feb-2022
CFR0011-120-00
1 of 87
© 2022 Renesas Electronics