Document 509
For TI LM5071 & LM5072
Flyback Transformer PD Controllers
• Dual-output flyback transformer for Power over Ethernet
• Operates in continuous mode at 250 kHz with 14 – 60 V input
• 2000Vrms isolation from primary and auxiliary to secondaries
Core material Ferrite
Terminations RoHS compliant tin-silver over tin over nickel over phos
bronze. Other terminations available at additional cost.
Weight 6.35g
Ambient temperature –40°C to +85°C
Storage temperature Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level ꢁMSLH 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time ꢁFITH / Mean Time Between Failures ꢁMTBFH
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 175 per 13″ reel. Plastic tape: 32 mm wide, 0.5 mm thick,
28 mm pocket spacing, 12.93 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf
Part
L at 0 A2
±±0ꢀ ꢁ(µH
L at Ipk3
min ꢁ(µH
DCR max
ꢁOhmsH
Leakage L4
max ꢁ(µH
Turns
ratios
Ipk3
ꢁAH
number1
Outputs
DA2257-AL_
35.0
30.0
0.225 (aux)
0.138 (gate)
0.010 (sec 1)
0.018 (sec 2)
0.062 (pri)
0.95
2 :1 (pri:aux)
3.6 :1 (pri:gate)
6 :1 (pri:sec1)
3.6 :1 (pri:sec 2)
2.7
10 V, 0.05 A (aux)
5.5 V, 0.05 A (gate)
3.3 V, 2.0 A (sec 1)
5.0 V, 1.0 A (sec 2)
1. When ordering, please specify packaging code:
DA2257-ALD
2. Inductance is for the primary, measured at 250 kHz, 0.2 Vrms, 0 Adc.
3. Ipk is peak primary current drawn at minimum input voltage.
4. Leakage inductance is for the primary winding with all other pins
shorted.
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (175 parts per full reel).
5. Electrical specifications at 25°C.
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
Dot above pin1
9
5
Gate
Pri
4
8
0.500
12,70
max
Sec 1
7
0.004/0,10
0.039
1,00
1
10
0.699
17,75
max
Aux
Sec 2
6
0.050
1,27
0.028
2
0.512
13,00
0.061
1,55
0.590
14,99
0,70
6
5
1
0.530
13,46
Recommended
Land Pattern
max
1
0.098
2,50
0.098
2,50
10
inches
mm
Dimensions are in
Document 509 Revised 10/29/08
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.