DA103JC

更新时间： 2024-11-17 11:01:31

品牌	Logo	应用领域
村田 - MURATA		变压器音频变压器
页数	文件大小	规格书
3页	131K
描述
民用设备,工业设备

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

DA103JC 技术参数

是否Rohs认证：	符合	生命周期：	Active
包装说明：	ROHS COMPLIANT	Reach Compliance Code：	compliant
ECCN代码：	EAR99	风险等级：	5.55
其他特性：	TURNS RATIO: 1:1	高度：	6.35 mm
长度：	9.52 mm	安装特点：	SURFACE MOUNT
最高工作温度：	85 °C	最低工作温度：	-40 °C
包装方法：	TUBE	物理尺寸：	L9.52XB9.0XH6.35 (mm)
表面贴装：	YES	变压器类型：	GENERAL PURPOSE AUDIO TRANSFORMER
宽度：	9 mm	Base Number Matches：	1

DA103JC 数据手册

DA100 Series

Transformers for Digital Audio Data Transmission

SELECTION GUIDE

Max.

Leakage

Primary

Inductance

(10kHz, 50mV)

Isolation

(Flash tested

Inductance

for 1 second)

Order Code

(100kHz, 10mV)

μH

Vμs

Vrms

2000

DA101C

DA102C

DA103C

1:1

1.00 - 1.59

0.22

46.80

52.10

FEATURES

ꢀRoHS compliant

1:1

2.00 - 3.00

4.00 - 5.96

0.39

0.91

40.40

36.30

49.70

46.40

ꢀCompatible with leading chip sets

ꢀ2kVrms isolation

ORDER CODE DETAILS

ꢀIndustry-standard pinout

ꢀSurface mount option

ꢀUL 94 V-0 package materials

ꢀLow proﬁle

Order Code

Package Type

Packaging Type

Tube

Quantity

DAXXXC

DAXXXMC

DAXXXMC-R

6 Pin DIL

6 Pin SM

Tube

ꢀSuitable for both 75 & 110Ω circuits

ꢀToroidal construction

ꢀCompliant with AES/EBU standards

ꢀFully encapsulated

Tape & Reel

500

ABSOLUTE MAXIMUM RATINGS

Operating free air temperature range

0°C to 70°C

–40°C to 125°C

Storage temperature range

DESCRIPTION

The Digital Audio Range of transformers is

designed to improve the balance of transmitter

and receiver circuitry in hi-ﬁ equipment,

video games and other applications requiring

high-performance digital audio transmission.

Compliant with AES/EBU recommendations for the

digital audio interface, offering optimised shunt

capacitance between primary and secondary

windings. Capable of operating over the audio

data rate frequency range, providing isolation from

50-60Hz noise.

All speciﬁcations typical at T_A=25°C

TECHNICAL NOTES

ISOLATION VOLTAGE

REPEATED HIGH-VOLTAGE ISOLATION TESTING

‘Hi Pot Test’, ‘Flash Tested’, ‘Withstand Voltage’, ‘Proof Volt-

age’, ‘Dielectric Withstand Voltage’ & ‘Isolation Test Voltage’ testing of a barrier component can actually degrade

are all terms that relate to the same thing, a test voltage,

applied for a speciﬁed time, across a component designed

to provide electrical isolation, to verify the integrity of that

isolation.

It is well known that repeated high-voltage isolation

isolation capability, to a lesser or greater degree

depending on materials, construction and environ-

ment. This series has toroidal isolation transformers,

with no additional insulation between primary and

secondary windings of enameled wire. While parts

can be expected to withstand several times the

stated test voltage, the isolation capability does de-

pend on the wire insulation. Any material, including

this enamel (typically polyurethane) is susceptible

to eventual chemical degradation when subject to

very high applied voltages thus implying that the

number of tests should be strictly limited. We there-

fore strongly advise against repeated high voltage

isolation testing, but if it is absolutely required, that

the voltage be reduced by 20% from speciﬁed test

voltage.

All products in this series are 100% production tested at

their stated isolation voltage.

A question commonly asked is, “What is the continuous

voltage that can be applied across the part in normal opera-

tion?”

For a part holding no speciﬁc agency approvals both input

and output should normally be maintained within SELV limits

i.e. less than 42.4V peak, or 60VDC. The isolation test volt-

age represents a measure of immunity to transient voltages

and the part should never be used as an element of a safety

isolation system. The part could be expected to function cor-

rectly with several hundred volts offset applied continuously

across the isolation barrier; but then the circuitry on both

sides of the barrier must be regarded as operating at an

unsafe voltage and further isolation/insulation systems must

form a barrier between these circuits and any user-acces-

sible circuitry according to safety standard requirements.

This consideration equally applies to agency recog-

nized parts rated for better than functional isolation

where the wire enamel insulation is always supple-

mented by a further insulation system of physical

spacing or barriers.

For full details go to

www.murata-ps.com/rohs

www.murata-ps.com

Technical enquiries - email: mk@murata-ps.com, tel: +44 (0)1908 615232

KMP_DA100C_C02 Page 1 of 3

12 3

中文翻译

下载PDF

与DA103JC相关器件

型号	品牌	获取价格	描述	数据表
DA103JC-R	MURATA	获取价格	民用设备,工业设备
DA103M	CANDD	获取价格	Transformers for Digital Audio Data Transmission
DA103MC	MURATA	获取价格	Transformers for Digital Audio Data Transmission
DA103MC-R	MURATA	获取价格	Transformers for Digital Audio Data Transmission
DA103MR	CANDD	获取价格	Transformers for Digital Audio Data Transmission
DA105-BW-W	Carling Technologies	获取价格	Toggle Switch, SPST, On-off, Maintained, Wire Terminal, Toggle Bat Actuator, Panel Mount
DA105-PW-B	Carling Technologies	获取价格	Toggle Switch, SPST, On-off, Maintained, Wire Terminal, Toggle Actuator, Panel Mount
DA106ERW	MPD	获取价格	Analog Circuit
DA106K	ROHM	获取价格	Rectifier Diode, 1 Element, 0.015A, 8V V(RRM), Silicon
DA106KT146	ROHM	获取价格	Rectifier Diode, 1 Element, 0.015A, Silicon

与DA103JC相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

13
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

7
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

35
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

31

产品中心

服务支持

精选活动

关于我们

帮助中心

DA103JC

DA103JC 技术参数

DA103JC 数据手册

与DA103JC相关器件

与DA103JC相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

DA103JC

DA103JC 技术参数

DA103JC 数据手册

与DA103JC相关器件

与DA103JC相关文章

您还可以找

您在本页遇到什么问题？