Enclosed Switch
D4C
CSM_D4C_DS_E_2_1
Compact Limit Switch That's Also
Thin and Highly Sealed
• Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on
approved models.)
• Sealing characteristics that meet IEC IP67 degree of
protection.
• Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
• Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
• Multiple mounting possible with Switches with Plungers.
• Models with red LED indicators added to series for easy
confirmation of operation.
(Set by default to light for non-operation.)
• VCTF cables with CE marking.
(Applicable only to standard models.)
Be sure to read Safety Precautions on page 13 to 14 and
Safety Precautions for All Limit Switches.
Model Number Structure
Model Number Legend (Not all combinations are possible. Ask your OMRON representative for details.)
Standard Models
Pre-wired Models
Weather-resistant Models
D4C-@@@
D4C-@0@@-@@@@@@
D4C-@@@-P
(1)(2)(3)
(1) (2)
(3)
(4)
(1)(2)(3) (4)
(1) Rated Current
(1) Rated Current
(1) Rated Current
1: 5 A at 250 VAC, 4 A at 30 VDC
1: 1 A at 125 VAC, 1 A at 30 VDC
(Without operation indicator)
2: 1 A at 125 VAC (with operation indicator)
3: 1 A at 30 VDC (with operation indicator)
1: 5 A at 250 VAC, 4 A at 30 VDC
2: 5 A at 125 VAC (with LED indicator)
3: 4 A at 30 VDC (with LED indicator)
4: 0.1 A at 125 VAC, 0.1 A at 30 VDC
2: 5 A at 125 VAC (with LED indicator)
3: 4 A 30 VDC (with LED indicator)
4: 0.1 A at 125 VAC, 0.1 A at 30 VDC
5: 0.1 A at 125 VAC (with LED indicator)
6: 0.1 A at 30 VDC (with LED indicator)
(2) Actuator
(2) Cable Specifications
01: Pin plunger
02: Roller plunger
2: VCTF oil-resistant cable (3 m)
3: VCTF oil-resistant cable (5 m)
(2) Cable Specifications
2: VCTF oil-resistant cable (3 m)
3: VCTF oil-resistant cable (5 m)
4: VCTF (3 m)
5: VCTF (5 m)
6: SJT(O) (3 m)
31: Sealed plunger
32: Sealed roller plunger
24: Roller lever (high-sensitivity model)
(3) Actuator
20: Roller lever
24: Roller lever (high-sensitivity model)
27: Adjustable roller lever
29: Adjustable rod lever
(3) Wiring Specifications
DK1EJ:Pre-wired models
(3 conductors: DC specification)
AK1EJ: Pre-wired models
(3 conductors: AC specification)
M1J: Connector models for ASI devices
(2 conductors: NO wiring)
7: SJT(O) (5 m)
(4) Structure
P: Weather-resistant
(3) Actuator
01: Pin plunger
02: Roller plunger
03: Crossroller plunger
20: Roller lever
24: Roller lever (high-sensitivity model)
31: Sealed pin plunger
32: Sealed roller plunger
33: Sealed crossroller
50: Plastic rod
(4) Cable length
03: 0.3 m
Wiring Specifications
Internal switch
Connector
COM
NC
3
2
4
60: Center roller lever
NO
1