Detection Switch
D2X
Switch with Crimp Connector
• Reduced wiring time with AMP crimp-type connectors
• Snap-fit attachment for easy installation
• Actuator operates from either side, allowing mounting in
either direction
• High contact force and wiping action for greater contact
reliability
• Rated load 0.1 A at 30 VDC
• RoHS Compliant
Ordering Information
Actuator
Terminal
Contact OF
Model
Standard Model
D2X-C
Center mounted rotary lever
Crimp-type connector
50 g
Specifications
■ Characteristics
Electrical ratings
Operating speed
Operating frequency
0.1 A, 30 VDC (resistive load)
0.1 mm to 100 mm/second
Mechanical: 60 operations per minute
Electrical: 30 operations per minute
Contact resistance
Insulation resistance
Dielectric strength
200 mΩ max.
100 MΩ min. at 250 VDC
250 VAC, 50/60 Hz for 1 minute between terminals of same polarity
250 VAC, 50/60 Hz for 1 minute between current-carrying metal parts and ground
Malfunction: 10 to 55 Hz, 1.5 mm double amplitude
Vibration resistance
Shock resistance
Destruction: 500 m/s2 (approx. 50G) max.
Malfunction: 300 m/s2 (approx. 30G) max.
Degree of protection
IEC IP00
Degree of protection against electric shock Class I
Proof tracking index (PTI)
Ambient operating temperature
Ambient operating humidity
Service life
175
-10° to 70°C (at 60% RH max.) with no icing
45% to 85% (for 5°C to 35°C)
Mechanical: 1,000,000 operations min.
Electrical: 50,000 operations min.
Weight
Approx. 1 g
Note: 1. Data shown are of initial value.
2. The ratings apply under the following test conditions: Ambient Temperature = 20±2°C, Ambient Humidity = 65±5%, Operating frequency = 30 operations/min.
Detection Switch D2X
41