DATASHEET
D2-6 Family Audio SOC
Intelligent Digital Amplifier and Sound Processor
FN7838
Rev.4.00
Mar. 19, 2019
The D2-6 family (D2-71083, D2-74083, D2-71583, D2-74583,
and D2-74383) digital audio processor devices are complete
System-on Chip (SoC) audio processor and Class-D amplifier
controllers. Integrated DSP processing and configurable audio
processing algorithms provide an extremely flexible platform
for feature rich and cost-effective quality audio solutions which
benefit from the addition of Class-D amplifiers and DSP audio
processing, meeting demands of consumer electronics
applications.
Features
• Advanced D2-6 family digital audio processor IC
- Pin compatible and function/feature compatible with the
D2 Audio DSP D2-3 family device
• Total System on Chip (SoC)
- All digital Class-D amplifier controller
- Full 5.1/7.1/9.1-channel amplifier platform support
• Enhanced audio processing decoders
The 12 integrated digital PWM controllers can be used in a
variety of multi-channel audio system configurations, supporting
powered as well as line outputs. Fully protected amplifier control
provides efficient and clean Class-D power output support.
®
- Dolby Digital/AC3
®
- Dolby Pro Logic IIx
- AAC LC™
®
The D2-6 device family supports full audio decoding for
formats including Dolby® Digital, Dolby® Pro Logic IIx, AAC
LC™, DTS® Digital Surround, and Dolby® Digital Plus. The
D2-6 family is pin-compatible and function/feature compatible
with the D2-3 family devices, enabling additional decoding
capability to existing designs, or providing cost optimization to
lower-featured systems not requiring the additional audio
processing and decode capability.
- DTS Digital Surround
®
- Dolby Digital Plus
• D2 Audio DSP sound enhancement algorithm and
virtualization
• Expanded on-chip memory capacity
• Integrated DSP processing
- 12 channels of Digital Signal Processing (DSP) including
equalizers, filters, mixers and other common audio
processing blocks
Applications
• Audio Video Receiver (AVR)
- Fully configurable and routable audio signal paths
• Multi-channel surround soundbar
• Home Theater in a Box (HTiB)
• Flexible audio input and output configurations
• Embedded 8-channel sample rate converter
- Sample rates from 32kHz up to 192kHz
• Multi-channel Multi-Media (MM) systems
• Installed steerable audio arrays
• Bluetooth/WiFi voice-enabled speaker systems
• Automotive trunk/amplified solutions
• Real-time amplifier control and monitoring
- Supports bridged, half-bridged, and Bridge-Tied Load
(BTL) topologies, using discrete or integrated power
stages from 10W to over 500W
Related Literature
For a full list of related documents, visit our website:
- Complete fault protection with automatic recovery
• D2-71083, D2-74083, D2-71583, D2-74583, D2-74383 device pages
D2-6 Digital Audio Processor
S/PDIF
Digital I/O
Interface
2x S/PDIF Digital Input
8-Channel
Sample
Rate
24-Bit Digital
Signal Processor PWM Engine
12-Channel
S/PDIF Digital Output
A/Vsync I/O
PWM
Output
Drive
PWM Outputs
Protection I/O
Converter
Digital
Audio
Interface
2
I S Digital Audio Input
DSD
Decimator
Engine
2
I S Digital Audio Output
Audio Processing Decoders
•D2 Audio DSP
•Dolby® Digital/AC3,
•Dolby Pro Logic IIx
•AAC LC™
•DTS® Digital Surround
•Dolby® Digital Plus
4x Serial
Audio
Interface
2
SAI [0:3] I S/TDM
Digital Audio Input
Amplifier
Protection
Test,
Timer, PLL
HD Audio
Interface
HD Audio Interface
Stereo Analog Input
Control Ports
Power Supply
and Control
Stereo
ADC
SPI
GPIO
2-Wire
(I C Compliant)
2
FIGURE 1. BLOCK DIAGRAM
FN7838 Rev.4.00
Mar. 19, 2019
Page 1 of 33