Surface Mount Zener Diodes
COMCHIP
www.comchip.com.tw
www.comchip.com.tw
CZRB5926 - CZRB5956
Voltage: 11- 200 Volts
Power: 1.5 Watts
Feature
- For surf ace mounted applications in order to
optimize board space
- Low profile package
- Built-in strain relief
- Glass passivated junction
SMB/DO-214AA
- Low inductance
- Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
0.083(2.11)
0.075(1.91)
0.155(3.94)
0.130(3.30)
0.185(4.70)
0.160(4.06)
0.012(0.31)
0.006(0.15)
Mechanical data
0.096(2.44)
0.083(2.13)
- Case: JEDEC DO-214AA Molded plastic over
- Terminals: Solder Plated, solderable per
Flammability Classification 94V-O
0.008(0.20)
0.203(0.10)
0.050(1.27)
0.030(0.76)
0.220(5.59)
0.200(5.08)
MIL-STD-750, method 2026
- Weight:0.003 ounce, 0.093 gram
Dimensions in inches and (maillimeter)
Maximum Ratings and Electrical Characterics
Parameter
Symbol
Value
Units
DC Power Dissipation @ TL=75, Measure at Zero Lead Length(Note 1, Fig.)
Derate above 75 °C
1.5
15
Watts
mW/°C
PD
Peak forward Surge Current 8.3ms single half sine-wave superimposed on
rated load (JEDEC Method) (Note 1,2)
IFSM
10
Amps
°C
TJ, TSTG
Operating Junction and Storage Temperature Range
-55 to +150
NOTES:
1. Mounted on 5.0mm2(.013mm thick) land areas.
2. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
3. ZENER VOLTAGE (Vz) MEASUREMENT Nominal zener voltage is measured with the device
function in thermal equilibrium with ambient temperature at 25 °C.
4. ZENER IMPEDANCE (Zz) DERIVATION ZZT and ZZK are measured by dividing the ac voltage drop across
the device by the accurrent applied. The specified limits are for IZ(ac) = 0.1 IZ, (dc) with the ac freqency = 60Hz.
Page 1
MDS0208006A