CY8CMBR2044
Four Button CapSense® Controller
Four Button CapSense® Controller
Features
Overview
■ Easy to use capacitive button controller
❐ Four-button solution configurable through Hardware straps
❐ No software tools or programming required
❐ Four general-purpose outputs (GPOs)
❐ GPOs linked to CapSense® buttons
The CY8CMBR2044 incorporates several innovative features to
save time and money to quickly enable a capacitive touch
sensing user interface in your design. It is a hardware
configurable device and does not require any software tools or
coding. This device is enabled with Cypress's revolutionary
SmartSense™
Auto-Tuning
algorithm.
SmartSense™
❐ GPOs support direct LED drive
Auto-Tuning ends the need to manually tune the user interface
during development and production ramp. This speeds the time
to volume and saves valuable engineering time, test time and
production yield loss.
■ Robust noise performance
❐ Specifically designed for superior noise immunity to external
radiated and conducted noise
❐ Low radiated noise emission
The CY8CMBR2044 CapSense controller supports up to four
capacitive touch sensing buttons and four General Purpose
Outputs (GPOs). The GPO is an active low output controlled
directly by the CapSense input making it ideal for a wide variety
of consumer, industrial, and medical applications. The wide
operating range of 1.71 V to 5.5 V enables unregulated battery
operation, further saving component cost. Also, the same device
can be used in different applications with different power
supplies, including low power supplies.
■ SmartSense™ Auto-Tuning
❐ Saves time and effort in device tuning
❐ CapSense parameters dynamically set in runtime
❐ Maintains optimal button performance even in noisy
environment
❐ Wide parasitic capacitance CP range (5 pF–40 pF)
■ System Diagnostics of CapSense buttons - reports any faults
at device power up
This device supports ultra low-power consumption in both run
mode and deep sleep mode to stretch battery life. In addition,
this device also supports many advanced features which
enhance the robustness and user interface of the end solution.
Some of the key advanced features include Noise Immunity and
FSS. Noise Immunity improves the immunity of the device
against radiated and conducted noise, such as audio and radio
frequency (RF) noise. FSS provides robust sensing even with
closely spaced buttons. FSS is a critical requirement in small
form factor applications.
❐ Button shorted to Ground
❐ Button shorted to VDD
❐ Button to button short
❐ Improper value of modulator capacitor (CMOD
❐ Parasitic capacitance (CP) out of range
)
■ Advanced features
❐ Toggle ON/OFF feature on GPOs
❐ Flanking Sensor Suppression (FSS) provides robust sensing
even with closely spaced buttons
❐ Configurable LED ON time after button release
❐ Button output reset if touched for excessive time
❐ User-controlled Button Scan Rate
Serial Debug Data output gives the critical information about the
design, such as button Cp and Signal-to-Noise Ratio (SNR). This
further helps in production line testing.
❐ Serial Debug Data output
• Simplifies production line testing and system debug
■ Wide operating voltage range
❐ 1.71 V to 5.5 V – ideal for both regulated and unregulated
battery applications
■ Low power consumption
❐ Supply current in run mode as low as 15 µA[1] per button
❐ Deep sleep current: 100 nA
■ Industrial temperature range: –40 °C to + 85 °C
■ 16-pad
quad
flat
no
leads
(QFN)
package
(3 mm × 3 mm × 0.6 mm)
Note
1. Power consumption calculated with 1.7% touch time, 500 ms scan rate, and C of each sensor < 19 pF.
P
Cypress Semiconductor Corporation
Document Number: 001-57451 Rev. *E
•
198 Champion Court
•
San Jose, CA 95134-1709
•
408-943-2600
Revised May 22, 2012
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
