DATA SHEET • CX77144
POWER AMPLIFIER MODULE FOR CDMA (887–925 MHZ)
Table 5. Electrical Specifications for CDMA Recommended Operating Conditions (1)
Characteristics
Symbol
Condition
Min.
Max.
Unit
VCONT ≥ 2.5 V
PO = 18 dBm
(2)
GLOW
20.8
27.5
Gain conditions Digital Mode
dB
VCONT ≤ 0.5 V
PO = 27 dBm
GHIGH
25.4
30.7
Reference Current
Control Current
IREF
—
—
—
5.0
0.5
mA
mA
ICONT
VCONT = 2.5 V
VREF = 0 V
VCONT = 0 V
Total Supply current in Power-down Mode
IPD
—
—
—
—
—
5.0
µA
VCONT ≥ 2.5 V
PO ≤ 18 dBm
(2)
(2)
ACP1LOW
ACP1HIGH
ACP2LOW
ACP2HIGH
–44.0
–44.0
–56.0
–56.0
885 kHz offset
1.98 MHz offset
VCONT ≤ 0.5 V
PO ≤ 27 dBm
(3)(4)
Adjacent Channel Power
VCONT ≥ 2.5 V
PO ≤ 18 dBm
dBc
dBc
VCONT ≤ 0.5 V
PO ≤ 27 dBm
Second
Third
FO2
PO ≤ 27 dBm
PO ≤ 27 dBm
PO ≤ 27 dBm
—
—
—
—
—
—
–35.0
–40.0
–136
6.0
Harmonic Suppression
FO3
Noise Power in RX Band 832-870 MHz
Noise Figure
RxBN
NF
dBm/Hz
dB
Input Voltage Standing Wave Ratio
VSWR
—
2.0:1
—
5:1 VSWR
All phases
Stability (Spurious output)
S
—
–60.0
—
dBc
(5)
Ruggedness – No damage
Ru
PO ≤ 27 dBm
10:1
VSWR
(1)
Per Table 2, unless otherwise specified.
(2)
For low power mode, VCC1 and VCC2 = 1.4 V
(3)
ACP is specified per CDMA2000 as the ratio of the total in-band power (1.23 MHz BW) to adjacent power in a 30 kHz BW.
(4)
CDMA2000 is configured as DCCH = 9600, SCHO = 9600, PCH (Walsh 0) = –3.75 dB, and Peak-to-Average Ratio (CCDF = 1%) = 4.5 dB.
For IS95, PO = 27.5 dBm is acceptable to meet the specified ACPR values.
(5)
All phases, time = 10 seconds.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
June 9, 2004 • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • 102047A
4