CUT75 Series
https://product.tdk.com/en/power/cut
www.emea.lambda.tdk.com/cut
75W Dual or Triple Output Low Profile Power Supplies
The triple output CUT75 power supplies have two independent, isolated, converters, one for the main 5V output, and one for the auxiliary outputs. This topol-
ogy provides several benefits - no minimum loading, enhanced load & line regulation and the ability to connect the auxiliary outputs in series to generate either
a 24V or 30V output. The series is certified to both the IEC60601-1 and IEC62368-1 safety standards. Several mechanical configurations are available - open
frame, an attached baseplate or with a baseplate and cover enclosure. Screw terminal blocks for the input and output connectors can also be selected.
Features
Benefits
• 3 x 5 Footprint With a Low 1.06” (27mm) Height
• Output 1 Isolated From Outputs 2 & 3
• No Minimum Loading
• Space Saving in End Equipment
• Flexible Utilization
• Reduced Load Regulation
• Versatile Mounting
• Open Frame, Baseplate or Enclosed Formats
• Three Year Warranty
• Low Cost of Ownership
Model Selector
Model
Voltage
(V)
Adjustable
Range (V)
Max
Current (A)
Max
Power (W)
Load Reg
(mV)
Line Reg
Ripple Noise
(mV) (1)
(mV)(1)
V1
V2
V3
V1
V2
5
+12
-12
5
5 - 5.25
Fixed
Fixed
5 - 5.25
Fixed
8.0
3.0
1.0
8.0
1.0
40.0
36.0
100
600
600
100
750
50
240
240
50
120
150
150
120
150
CUT75-522
CUT75-522
CUT75-5FF
CUT75-5FF
40.0
24.0
24
300
(Leave common terminal unconnected)
5 - 5.25
Fixed
Fixed
5 - 5.25
Fixed
V1
V2
V3
V1
V2
5
+15
-15
5
8.0
2.5
1.0
8.0
1.0
40.0
100
750
750
100
750
50
300
300
50
120
150
150
120
150
37.5
40
30
30
300
(Leave common terminal unconnected)
CUT75-
522
/
A
blank Open frame with JST connectors
Output voltage see model selector
/A
Cover with JST connectors
/B
/T
/TA
/TB
Baseplate with JST connectors
Open frame with screw connections
Cover with screw connections
Baseplate with screw connections
Preferred model
1
CUT75 Series