Features
■ 27 mm and 28 mm diameter
■ 10 turns
■ No backlash - mounted directly to
potentiometer shaft
■ For use with precision potentiometers or
other rotating devices up to 10 turns
■ High force, positive brake
CT-23/CT-26 Turns-Counting Dial
Mechanical and Physical Characteristics
Number of Turns ..................................................................................................................................................................................0 to 10
Readability - Over 10 Turns..........................................................................................................................................Within 1/500 of a turn
Torque with Brake Engaged .....................................................................................................................9.88 N-cm (14.0 oz.-in.) maximum
Markings .............................................................................................................................................................White on black background
Locking Brake................................................................................................................................................................Yes, Positive, friction
Weight.................................................................................................................................................................................34 grams (1.2 oz.)
Set Screw ...........................................................................................................................................................ISO M3x 0.35, one included
Set Screw Tightening Torque ...................................................................................................................16.94 N-cm (1.5 lbs.-in.) minimum
Hex Key Size................................................................................................................................................................................1.5 mm hex
Shaft and Bushing Requirements
Shaft Diameter Requirements ........................................................................................................................................Refer to chart below
Shaft Extension Beyond Face of Locator Plate................................................................................................11.05 mm (0.43 in.) minimum
16.25 mm (0.63 in.) maximum
Bushing Extension Beyond Face of Locator Plate............................................................................................4.00 mm (0.15 in.) maximum
Bourns® Model CT-23, front of panel mounting, digital turns-
counting dial saves valuable internal space. Highly accurate, it will
enhance the man/machine interface of any control panel. Easy to
read white on black numerals provide excellent legibility and
accurate readings within 1/500 of a turn.
Bourns® Model CT-26 recessed mounting digital turns-counting dial,
counterpart to the Bourns Model CT-23, provides a lower panel
profile. The design simplifies installation requiring only one panel
hole. The CT-26 maintains the same high level of symmetry,
legibility and accuracy of its counterpart.
CT-23 MOUNTING INSTRUCTIONS
CT-26 MOUNTING INSTRUCTIONS
1. Drill or punch panel. See suggested hole pattern below.
2. Insert potentiometer in panel.
1. Drill or punch panel. See suggested hole pattern below.
2. Insert turns-counting dial in panel cutout and secure with
mounting nut.
3. Mount potentiometer in panel with nut and lockwasher supplied
with the potentiometer.
3. Secure locator plate to potentiometer bushing using two hex
nuts.
4. Turn the potentiometer shaft counterclockwise to obtain minimum
resistance or voltage ratio (not necessarily at the end of travel).
5. Loosen set screw in knob with allen wrench. Set the dial readout
to “000.”
6. Slip the dial carefully over the potentiometer shaft. Tighten the
set screw without causing movement of the dial readout or
potentiometer shaft.
4. Turn the potentiometer shaft counterclockwise to obtain minimum
resistance or voltage ratio (not necessarily at the end of travel).
5. Loosen set screw in turns-counting dial with allen wrench. Set
the dial readout to “000.”
6. Slip the potentiometer shaft into the turns-counting dial, insuring
that the notch in the locator plate is over the pin at the rear of the
dial. Tighten the set screw without causing movement of the dial
readout or potentiometer shaft.
For mounting, the maximum recommended panel thickness is
1/8 " (3.1 mm).
MM
(IN.)
DIMENSIONS:
Dimensional Drawings
How to Order
Part
Number
Accepts Shaft
Diameter
Finish
CT-23-6A 6.35 mm (.250)
CT-23-6M 6 mm (.236)
CT-26-6A 6.35 mm (.250)
CT-26-6M 6 mm (.236)
Black
Knurl
with Satin
Chrome
Face
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
REV. 04/06
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
替代型号
如果您发现信息不准确，
