CRCW0201 e3
www.vishay.com
Vishay
Lead (Pb)-Free Commodity Thick Film Chip Resistors
FEATURES
• High volume product suitable for commercial
applications
• Pure tin solder contacts on Ni barrier layer
provides compatibility with lead (Pb)-free and
lead containing soldering processes
• Metal glaze on high quality ceramic
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
LIMITING
ELEMENT
VOLTAGE
Umax.
ACRMS/DC
V
CASE
SIZE
INCH
CASE
SIZE
METRIC
POWER RATING
TEMPERATURE
COEFFICIENT
ppm/K
RESISTANCE
RANGE
Ω
TOLERANCE
%
MODEL
P70
SERIES
W
200
-200 / +400
100
10.0 to 10M
1.0 to 9.76
47.0 to 1M
10.0 to 10M
1.0 to 9.76
10.0 to 10M
1.0 to 9.1
0.5
1
E24; E96
E24; E96
E24
0.05
30
200
CRCW0201
0201 RR 0603M
-200 / +400
200
5
-200 / +400
Zero-ohm-resistor: Rmax. = 50 mΩ, Imax. at 70 °C = 1.0 A
Notes
•
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime
Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material
•
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
W
CRCW0201
0.05
Rated Dissipation at 70 °C (1)
Operating Voltage Umax. ACRMS/DC
Insulation Voltage Uins (1 min)
Insulation Resistance
V
30
V
50
Ω
> 109
Operating Temperature Range
Weight
°C
mg
-55 to +155
0.17
Note
(1)
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded
Revision: 05-Jan-2021
Document Number: 20052
1
For technical questions, contact: thickfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000