CRCW0201 e3
www.vishay.com
Vishay
Lead (Pb)-free Commodity Thick Film Chip Resistors
FEATURES
• High volume product suitable for commercial
applications
• Pure tin solder contacts on Ni barrier layer
provides compatibility with lead (Pb)-free and
lead containing soldering processes
• Metal glaze on high quality ceramic
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
LIMITING
ELEMENT
VOLTAGE
Umax.
ACRMS/DC
V
CASE
SIZE
INCH
CASE
SIZE
METRIC
POWER RATING
TEMPERATURE
COEFFICIENT
ppm/K
RESISTANCE
RANGE
TOLERANCE
%
MODEL
P70
SERIES
W
200
- 200/+ 400
100
10.0 to 10M
1.0 to 9.76
47.0 to 10M
10.0 to 10M
1.0 to 9.76
10.0 to 10M
1.0 to 9.76
0.5
1
E96
E24; E96
E24
0.05
30
200
CRCW0201
0201 RR 0603M
- 200/+ 400
200
5
- 200/+ 400
Zero-Ohm-Resistor: Rmax. = 50 m, Imax. at 70 °C = 1.0 A
Notes
•
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material.
•
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
W
CRCW0201
Rated Dissipation at 70 °C (1)
Operating Voltage Umax. ACRMS/DC
Insulation Voltage Uins (1 min)
Insulation Resistance
0.05
30
V
V
50
> 109
Operating Temperature Range
Weight/1000 Pieces
°C
mg
- 55 to + 155
0.17
Note
(1)
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded.
Revision: 06-Jun-12
Document Number: 20052
1
For technical questions, contact: thickfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000