The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
2.54mm Pitch Card Edge Connector
CR22 Series
■Features
1. 2.54mm pitch Contact
2. Variation in number
of contacts
20, 30, 34, 36, 44, 50, 60, 62, 68, 72, 80,100, and
120 contacts are available.
3. Board Mount Type
Straight dip and right angle through hole types are
available.
4. To prevent mis-insertion in the board
Using the polarizing key prevents mis-insertion in
the printed board.
■Product Standards
+
Storage Temperature Range: -10 to 60ç (Note 2)
+
Current rating: 3A
Operating Temperature Range: -30 to 85ç (Note 1)
Rating
Voltage rating: 300VAC
Operating Humidity Range: 40 to 80%
Storage Humidity Range: 40 to 70% (Note 2)
Item
Specification
Condition
1.Insulation Resistance
2.Withstanding Voltage
3.Contact Resistance
4.Vibration
500V DC
1000M ohms min.
1000V AC/1 minute.
No flashover or insulation breakdown.
20m ohms max.
100mA
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
No electrical discontinuity of 10μs or more
Insulation resistance : 1000M ohms min.
5.Humidity(Steady state)
(-65ç : 30 minutes→15 to 35ç: 5 minutes max.→
125ç : 30 minutes→15 to 35ç: 5 minutes max.) 5 cycles
6.Temperature Cycle
No damage, cracks, or parts looseness.
7.Durability (Mating/un-mating)
8.Resistance to Soldering heat
500 cycles
Contact resistance : 20m ohms max.
Manual soldering: 350ç for 3 seconds
No deformation of components affecting performance.
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3. Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for
a specific part number shown.
■Material
Parts
Material
PBT
Finish
Black
Remarks
UL94V-0
---------------
---------------
Insulator
Contact area Selective gold plated
Contact
Copper alloy
Lead area
Tin plated
■Ordering Information
CR22 A - 50 D - 2.54 DS
1
2
3
4
5
6
Series Name
Blank
: CR22
: With Mounting hole
1
2
3
Number of contacts : 20, 30, 34, 36, 44, 50, 60, 62,
68, 72, 80, 100, 120
A : Without mounting hole
B : Card Edge 7.62mm type with mounting hole
C : Card Edge 7.62mm type without mounting hole
D : VERSA bus type with mounting hole
E : VERSA bus type without mounting hole
:
Contact alignment : D Double side
4
5
6
Contact pitch
: 2.54mm
Contact type
DS : Straight type
DSA : Right angle type
A2