CNY17F
Vishay Semiconductors
www.vishay.com
Optocoupler, Phototransistor Output, no Base Connection
FEATURES
• Isolation test voltage, 5000 VRMS
• No base terminal connection for improved
common mode interface immunity
1
6
A
C
NC
C
• Long term stability
• Industry standard dual-in-line package
5
4
2
3
• Material categorization: For definitions of
compliance please see www.vishay.com/doc?99912
NC
E
AGENCY APPROVALS
• UL file no. E52744
• cUL tested to CSA 22.2 bulletin 5A
• DIN EN 60747-5-5 (VDE 0884-5), available with option 1
• BSI: EN 60065, EN 60950-1
• FIMKO
i179004-14
DESCRIPTION
The CNY17F is an optocoupler consisting of a gallium
arsenide infrared emitting diode optically coupled to a
silicon planar phototransistor detector in a plastic plug-in
DIP-6 package.
• CQC
The coupling device is suitable for signal transmission
between two electrically separated circuits. The potential
difference between the circuits to be coupled is not allowed
to exceed the maximum permissible reference voltages.
In contrast to the CNY17 series, the base terminal of the
F type is not conected, resulting in a substantially improved
common-mode interference immunity.
ORDERING INFORMATION
DIP-6
Option 6
C
N
Y
1
7
F
-
#
X
0
#
#
T
7.62 mm
Option 7
10.16 mm
Option 9
PART NUMBER
CTR
BIN
PACKAGE OPTION
TAPE
AND
REEL
> 8 mm
8 mm typ.
AGENCY CERTIFIED/PACKAGE
UL, cUL, BSI, FIMKO
DIP-6
CTR (%)
63 to 125
40 to 80
CNY17F-1
100 to 200
160 to 320
CNY17F-2
CNY17F-3
CNY17F-4
DIP-6, 400 mil, option 6
SMD-6, option 7
CNY17F-1X006
CNY17F-1X007 (1)
CNY17F-1X009T (1)
CNY17F-2X006
CNY17F-2X007T (1)
CNY17F-2X009T (1)
63 to 125
CNY17F-3X006
CNY17F-3X007T (1)
CNY17F-3X009T (1)
100 to 200
CNY17F-4X006
CNY17F-4X007T (1)
CNY17F-4X009T (1)
160 to 320
SMD-6, option 9
VDE, UL, cUL, BSI, FIMKO
DIP-6
40 to 80
CNY17F-1X001
CNY17F-1X016
CNY17F-1X017 (1)
CNY17F-1X019
CNY17F-2X001
CNY17F-2X016
CNY17F-2X017 (1)
CNY17F-2X019 (1)
CNY17F-3X001
CNY17F-3X016
CNY17F-3X017 (1)
CNY17F-3X019 (1)
CNY17F-4X001
CNY17F-4X016
CNY17F-4X017 (1)
-
DIP-6, 400 mil, option 6
SMD-6, option 7
SMD-6, option 9
Notes
•
(1)
Additional options may be possible, please contact sales office.
Also available in tubes; do not put T on end.
Rev. 2.1, 02-Jul-13
Document Number: 83607
1
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000