CM3196
2A Sink/Source DDR-I, -II Bus Termination Regulator
Product Description
Features
•
Ideal for DDR-I, -II V applications
The CM3196 is a sinking and sourcing regulator specif-
TT
ically designed for DDR-I, -II V bus termination. The
•
•
•
•
•
•
•
Sinks and sources 2A for DDR-I, 0.6A for DDR-II
Shutdown input to support ACPI states
Operates down to 1.5V input voltage
Integrated power MOSFETs
Overcurrent protection
TT
output voltage accurately tracks V
/2. For DDR-I it
DDQ
can source and sink current up to 2A with a load regu-
lation of 0.5%. This current adequately serves both sin-
gle and dual channel DDR-I memory systems. For
power conscious notebook applications, the CM3196
Over temperature protection
Excellent accuracy
also operates from a V
of 1.5V or 1.8V with less
DDQ
V
= V
30mV
TT
REF
current drive. For DDR-II applications, the CM3196
provides up to 0.6A at 0.9V to drive the memory con-
V
= V
/2 2%
TT
DDQ
•
•
8-pin SOIC or PSOP package
Lead-free versions available
troller V
TT.
For boards which support Suspend to RAM (STR)
functionality, the CM3196 provides a Shutdown (SD)
pin. When SD is set low, V will be in tri-state mode,
Applications
TT
causing the output to go high impedance. In this mode,
CM3196 power is saved by significantly reducing the
•
•
•
DDR-I, -II memory termination
Active termination buses
Graphics card memory termination
quiescent current. V
voltage remains V
/2.
REF
DDQ
The CM3196 provides overcurrent and over tempera-
ture protection. These features protect the chip from
excessive heating due to high current and high temper-
ature.
The CM3196 is housed in an 8-pin SOIC or PSOP
package and is available with optional lead-free finish-
ing.
Simplified Electrical Schematic
AVIN
VDDQ
PVIN
Over Temp
Over Current
Reference
SD
Driver
VTT
VREF
OUT
Buffer
IN
VSENSE
GND
© 2004 California Micro Devices Corp. All rights reserved.
04/22/04 430 N. McCarthy Blvd., Milpitas, CA 95035-5112
▲
Tel: 408.263.3214
▲
Fax: 408.263.7846
▲
www.calmicro.com
1