Ceramic Ball Grid
Termination Arrays
CHC Series
• Superior TaNFilm® resistors on ceramic substrate
• High density networks on a reduced footprint
• Excellent high frequency performance
• Standard tolerances to ±1%
High
purity alumina
substrate
Ball grid
terminations
• RoHS compliant terminations available
IRC’s Chipscale on ceramic CHC offers high performance terminal
solutions in a small surface mount package. Sn/Pb solder balls
placed on a ceramic substrate permit very low parasitic inductance and
capacitance. This improves speeds, lowers propagation delays, and reduces ground bounce. IRC’s proven
tantalum nitride thin film technology can handle the most demanding applications.
For all of your high density, small footprint termination needs, use IRC’s CHC Termination arrays.
Electrical Data
Resistance
Range (Ω)
Absolute
Tolerances
Package Power Element Power
Operating
Temperature
Package
Absolute TCR
Rating 70°C*
Rating 70°C*
10R to 4.7K
10R to 10.0K
10R to 2.2K
10R to 4.7K
10R to 4.7K
10R to 10.0K
10R to 2.2K
10R to 4.7K
10R to 4.7K
10R to 10.0K
10R to 2.2K
10R to 4.7K
10R to 4.7K
10R to 10.0K
10R to 2.2K
10R to 4.7K
10R to 4.7K
10R to 10.0K
10R to 2.2K
10R to 4.7K
±1%, ±2%
±5%
CB0565A
±100ppm/°C
0.6W
±1%, ±2%
±5%
CB0565B
CD0865A
CD0865B
CD1065A
CD1065B
CC0910A
CC0910B
CD0910A
CD0910B
±1%, ±2%
±5%
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
1.2W
1.6W
1.2W
1.2W
±1%, ±2%
±5%
±1%, ±2%
±5%
0.1W
-40°C to +85°C
±1%, ±2%
±5%
±1%, ±2%
±5%
±1%, ±2%
±5%
±1%, ±2%
±5%
±1%, ±2%
±5%
*Rated power is from 0°C to 70°C derated linearly to 0W at 85°C.
General Note
IRC reserves the right to make changes in product specification without notice or liability.
All information is subject to IRC’s own data and is considered accurate at time of going to print.
A subsidiary of
TT electronics plc
© IRC Advanced Film Division
• 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
CHC Series Issue April 2009 Sheet 1 of 4