Catalog 1308242
Issued 3-03
P&B
CG series
CMOS IC Tim e Delay Relay
• Repeatability to .05%
• Choice of timing modes
– Delay on operate
– Delay on release
– Interval on
• Knob adjustable
• 10A output relay with DPDT contacts
• Various models time from 0.5 sec. to 100 min.
File E22575
File LR15734
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that user also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Contact Data @ 25°C
Tim ing Modes
Arrangem ents: 2 Form C (DPDT).
Material: Silver-cadmium oxide alloy.
Rating: 10A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC;
1/3 HP @ 120VAC.
Delay on operate – Delay period begins when input voltage is applied. At
the end of the delay period, the relay will operate and will not release until
input voltage is removed. Reset occurs when input voltage is reapplied.
Expected Mechanical Life: 10 million operations.
Expected Electrical Life: 100,000 operations, min., at rated load.
INPUT
VOLTAGE
ON
OFF
➛
N.O. RELAY ON
CONTACTS OFF
TIME
➛
Initial Dielectric Strength
Betw een Open Contacts: 500V rms, 60 Hz.
Betw een All Other Conductors: 500V rms, 60 Hz.
Delay on release – Input voltage must be applied continuously to operate
the internal relay. When the control switch is closed, the relay energizes.
When the control switch is opened, timing begins. When timing is
complete, the relay will de-energize. Time may be reset to zero during
timing by closing the control switch.
CONTROL ON
SWITCH
OFF
Input Data @ 25°C
Voltage: 120VAC and 24VDC.
Pow er Requirem ent: AC Types: Typically less than 3 VA.
DC Types: Typically less than 3 W.
Transient Protection: Yes.
➛
N.O. RELAY ON
CONTACTS OFF
TIME
➛
Reverse Voltage Protection: Yes.
Interval on – The relay energizes and timing begins when input voltage is
applied. At the end of the time delay period the relay will de-energize.
Reset is accomplished by removing, then reapplying, the input voltage.
Input Voltages & Limits @25°C
Voltage
Type
Nom inal
Voltage
Minim um
Voltage
Maxim um
Voltage
AC
DC
120
24
105
20
130
32
INPUT
ON
VOLTAGE OFF
Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage).
AC models will operate on 50 or 60 Hz.
➛
N.O. RELAY ON
CONTACTS OFF
TIME
➛
Environm ental Data
Tem perature Range: Storage: -40°C to +85°C.
Operating: -10°C to +55°C.
Tim ing Specifications
Tim ing Ranges: From 0.5 to 5.0 sec. through 10 to 100 min.
Tim ing Adjustm ent: Knob adjustable.
Tolerance (for AC units add ±1/2 cycle 60 Hz.):
Knob Adj. Types:–0, +10% of max. specified at high end of timing range;
+0, –10% of min. specified at low end.
Delta Tim e (for AC units add ±1 cycle 60 Hz.): ±2% , typ.; ±5% , max.
Repeatability (including first cycle of operation):
AC: ±0.1% , typ.; ±0.5% , max.; but not less than ±16 ms.
DC: ±0.05% typ.; ±0.1% max.; but not less than ±3 ms.
Release Tim e: 30 ms, typ.; 45 ms, max.
Mechanical Data
Term ination: 8- or 11-pin octal style plug.
Enclosure: Yellow plastic case. Knob adjustable types have dial scale for
reference only.
Sockets: Models with 8-pin base fit either 27E122 or 27E891 (snap-on)
screw terminal sockets. 11-pin types fit either 27E123 or
27E892 (snap-on) screw terminal sockets.
Recycle Tim e: AC: 40 ms, typ.; 60 ms, max.
Weight: 8 oz. (227g) approximately.
DC: 30 ms, typ.; 45 ms, max.
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
1220