CDMC80D50/T150
Features
• Metal compound molding type construction.
PROVISIONAL
• Magnetically shielded.
• Qualified AEC-Q200
• Suitable for Large Current
• Operating temperature range: - 40deg C~+150deg C
(including coil’s self temperature rise)
Applications
RoHS
• LED Head light for Automobile
• ECU for Airbag, Water and Oil pump etc
• DC/DC converter
Dimension - [mm]
Reference Land pattern- [mm]
Electrical Characteristics
Part No.
Inductance (μH)
(±20%)
D.C.R (mΩ)
20degC
Saturation Current
Temperature
Rise current
(A) *3
(A) *2
*1
(±10%)
20degC
17.8
14.1
12.0
10.9
8.6
110degC
16.7
12.6
10.8
9.7
150degC
16.3
12.5
10.6
9.5
CDMC80D50T150NP-1R5MC
CDMC80D50T150NP-2R7MC
CDMC80D50T150NP-3R3MC
CDMC80D50T150NP-4R7MC
CDMC80D50T150NP-7R5MC
CDMC80D50T150NP-100MC
CDMC80D50T150NP-150MC
CDMC80D50T150NP-220MC
CDMC80D50T150NP-330MC
CDMC80D50T150NP-470MC
1.5
2.7
3.3
4.7
7.5
10
6.5
9.2
12.7
11.1
10.2
9.2
10.6
13.3
21.4
30.6
48.2
60.6
98.5
125.4
7.7
7.5
7.1
7.3
6.6
6.4
5.8
15
6.0
5.4
5.3
4.5
22
5.1
4.6
4.5
4.1
33
4.3
3.9
3.8
3.2
47
3.8
3.4
3.4
2.8
*1 Inductance Measuring frequency: 100kHz, 0.1V
*2 Saturation current: DC current which becomes inductance value drop down to 30% from nominal value.
*3 Temperature rise current : DC current which becomes ⊿T=40℃(Ta=20℃) in component body temperature.
Board conditions: FR4, Copper=70μm, four-layer PWB, t=1.6mm
*In order to select the proper inductor for your circuit design, it should be checked the inductor rated current for heat generation in the
worst case. Under normal operational condition, it shall not exceed the maximum operating temperature (150 deg C.)
*Allowable current of inductor is either saturation current or temperature rise current, whichever is lower.
*Absolute maximum voltage 40V DC.
*Take the static electricity measures to prevent deterioration of electric characteristics.
Note: This datasheet might be slightly modified without notice in order to improve the quality and reliability of the product. Please contact
an appropriate our sales in your regions for checking final spec before you place an order.
Page 1 of 4
Rev.7(2015.9)