CC2570
CC2571
www.ti.com
SWRS095A –FEBRUARY 2011–REVISED MARCH 2011
1- and 8-Channel ANT™ RF Network Processors
Check for Samples: CC2570, CC2571
1
FEATURES
–
–
–
CC2570 Supports One ANT Channel
CC2571 Supports Eight ANT Channels
2
•
RF Section
Support for Both Public, Private and
Managed ANT Networks
–
–
Single-Chip 2.4-GHz Radio, Including
Embedded ANT Protocol
–
Support for High-Resolution Proximity
Pairing
Excellent Link Budget, Enabling Long
Range Without External Front-Ends
–
–
Excellent Output Power (4 dBm)
APPLICATIONS
Suitable for Systems Targeting Compliance
With Worldwide Radio Frequency
Regulations: ETSI EN 300 328 and EN 300
440 Class 2 (Europe), FCC CFR47 Part 15
(US), and ARIB STD-T66 (Japan)
•
•
•
•
Sports and Fitness Equipment
Health and Medical Equipment
Consumer Health Devices
Consumer Electronics
–
Accurate Full-Range RSSI Function,
Especially Suited for Accurate Proximity
Pairing
DESCRIPTION
The CC2570 and CC2571 are ANT RF network
processors that implement the easy-to-use,
power-efficient ANT protocol. The CC2570 supports
one ANT channel, whereas the CC2571 supports
eight ANT channels. The CC2570/71 can be
connected to a host MCU (such as an MSP430)
through a UART or SPI serial interface and accessed
through a set of API calls. The majority of the ANT
protocol is built into the CC2570/71, including the
ANT-FS file system functionality; only the application
and profile layers must reside on the host MCU, thus
•
•
Layout
–
–
–
Few External Components
Reference Designs Available
40-Pin, 6-mm × 6-mm QFN Package
Low Power
–
Powered Down With Low-Power Timer:
1 µA
–
–
Powered Down Without Timer: 0.5 µA
Wide Supply Voltage Range (2 V–3.6 V)
keeping host MCU memory requirements to
minimum.
a
•
ANT Protocol Support
The ANT protocol has been designed to be very
power-efficient, yet is flexible enough to support
various network topologies (point-to-point, star,
connected star, 1-to-N, and N-to-1) and data transfer
modes (broadcast, acknowledged, burst data
transfer). Each logical ANT channel can be
independently configured for one-way or two-way
operation, depending on requirements of the
application.
–
Fully Compatible With the ANT and ANT+™
Protocols and Existing ANT Devices
–
–
Built-In ANT-FS™ Support
Easy Connection to Host MCU Through
Asynchronous or Synchronous Serial
Interface
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
ANT, ANT-FS are trademarks of Dynastream Innovations Inc.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011, Texas Instruments Incorporated